Teledyne 3110 operating instructions LOG Transmit Screen

RESET menu again. The data set can be downloaded using the LOG TRANSMIT screen (see Section 3.2.17).

To start the data logger:

1.Use the UP/DOWN keys to navigate to the LOG RESET & START screen and press ENTER.

2.When the screen begins to blink press ENTER again to start the data logger. Once the data logger has started, the screen changes RESET&START to STOP. During logging a blinking “L” appears in the upper left corner of the screen.

To stop the data logger:

1.Press ENTER to stop the data logger and return to the LOG RESET & START screen.

3.2.18LOG TRANSMIT Screen

Data can be downloaded to a computer using the optional RS-232 port and cable attached to a PC. The RS-232 port accepts a standard data cable with a DB-9 connector. The computer must be able to accept data from a RS-232 source with the following characteristics:

9600 baud

8 bit data no parity