Teledyne 3110 operating instructions FS Alarm Screen, HI-LOW Alarm Screen

Page 30

Operation

Model 3110

 

 

To enable or disable the alarm:

1.Use the UP/DOWN keys to navigate to the ALARM ENABLE screen. Then press ENTER to enter the alarm setup screen.

2.Use the UP/DOWN keys to toggle between ENABLED or DISABLED. Then press ENTER to accept the displayed status.

3.Press ENTER again to save the alarm status and return to the ALARM ENABLE screen.

3.2.7FS ALARM Screen

This screen indicates how the alarm relays activate—failsafe or non-failsafe. In failsafe mode the relays are energized when analyzer is NOT in alarm mode. In non-failsafe mode the alarm relay energizes when the analyzer goes into alarm mode. You can change the alarm relay behavior by entering the FS ALARM setup screen.

To toggle between failsafe and non-failsafe operation:

1.Use the UP/DOWN keys to navigate to the FS ALARM screen. Then press ENTER to enter the setup screen.

2.Use the UP/DOWN keys to toggle between FS or NON-FS options. Then press ENTER to accept the displayed status.

3.Press ENTER again to save the alarm status and return to the FS ALARM screen.

3.2.8HI-LOW ALARM Screen

The HI-LOscreen indicates how the Model 3110 alarm functions. The alarm on the Model 3110 can be set up as either a HI alarm or LO

30 Teledyne Analytical Instruments

Image 30
Contents Model Teledyne Analytical InstrumentsModel Ii Teledyne Analytical InstrumentsSpecific Model Information Portable Trace Oxygen AnalyzerSafety Messages Iv Teledyne Analytical InstrumentsPortable Trace Oxygen Analyzer Table of Contents Maintenance & Troubleshooting AppendixIndex Teledyne Analytical Instruments List of Figures Viii Teledyne Analytical InstrumentsCombustible GAS Usage Introduction IntroductionIntroduction Model Features Portable Trace Oxygen Analyzer IntroductionIntroduction Model Cell Warranty Method of AnalysisMicro-Fuel Cell Signal Output Accuracy and ResponseCompact Packaging Portable Trace Oxygen Analyzer Introduction Intentionally left blank Installation Portable Trace Oxygen Analyzer InstallationCharging the Batteries Installation Model Gas ConnectionsPortable Trace Oxygen Analyzer Installation Sensor Installation Installing a Trace SensorCalibration Procedure for Trace Analysis CalibrationSet the Sample Flow rate Bleeding the Regulator and Purging the Gas LineExternal Signal Operation Model OperationFront Panel Interface Enter KeyPortable Trace Oxygen Analyzer Operation Escape Key3 UP/DOWN Keys Operation and Setup Screens and Menus Available Menus and Their SequencePower on Screen Home ScreenDate Screen Enter Time ScreenStandard Alarm Screen Alarm EnableFS Alarm Screen HI-LOW Alarm ScreenLtch Alarm Screen Range 1 Screen Range 2 ScreenRange Screen Span Value Screen Span ScreenFilter Screen LOG Reset & Start Screen LOG Intv ScreenLOG Transmit Screen Power Down Screen Portable Trace Oxygen Analyzer Operation Replacing the Battery Maintenance & TroubleshootingRoutine Maintenance Maintenance ModelBattery Power Supply Service Portable Trace Oxygen Analyzer MaintenanceCell Replacement Battery Charger Port on the ModelCell Warranty Temperature Compensation Effect of CO2 on B-2 Cell Life Effects of CO2 on B-2 Cell LifeLeak Testing ProcedureIntentionally left blank Specifications AppendixAppendix Model Spare Parts List Portable Trace Oxygen Analyzer AppendixIndex Power Down screen, 39 power off Portable Trace Oxygen Analyzer IndexAppendix Model

3110 specifications

The Teledyne 3110 is a sophisticated, high-performance data acquisition and analysis system that has garnered attention in a range of scientific and industrial applications. Designed with advanced technologies, the Teledyne 3110 is optimized for versatility, enabling users to gather and analyze data from various sources with seamless integration.

One of the main features of the Teledyne 3110 is its modular design. This allows users to customize the system to meet their specific needs by adding or removing modules as necessary. It supports a wide range of input types, making it compatible with numerous sensors and devices, which enhances its utility in diverse environments.

The device boasts high precision and accuracy in data collection, which is crucial for applications where minute measurements matter. The instrument employs cutting-edge analog-to-digital converters, ensuring that data is captured with remarkable fidelity. Additionally, the Teledyne 3110 incorporates advanced signal processing technologies that improve data quality and reduce noise, facilitating clearer and more reliable analysis results.

Another key characteristic of the Teledyne 3110 is its user-friendly interface. The system comes equipped with intuitive software for data visualization and analysis, allowing users, even those with limited technical experience, to navigate the system efficiently. With comprehensive data export options, users can easily integrate the system's outputs into other software for further analysis and reporting.

Durability and reliability are also hallmarks of the Teledyne 3110. Built to endure harsh environments, the system is tested rigorously to ensure it meets high standards for protection against dust, moisture, and temperature variations. This robustness makes it applicable in fields such as environmental monitoring, industrial automation, and research laboratories.

Furthermore, the Teledyne 3110 supports real-time monitoring and data logging capabilities. This feature is essential for applications that require continuous oversight and data collection to respond promptly to any changes in conditions or parameters being monitored.

In summary, the Teledyne 3110 stands out as a versatile and reliable data acquisition system, leveraging modularity, precision, user-friendliness, and durability to serve a variety of applications effectively. Whether for research, industrial applications, or environmental monitoring, the Teledyne 3110 proves to be an invaluable tool for professionals seeking high-quality data insights.