Teledyne 3110 operating instructions Accuracy and Response, Signal Output, Compact Packaging

Page 14

Introduction

Model 3110

 

 

If you have a warranty claim, return the cell in question to the factory for evaluation. If it is determined that failure is due to faulty workmanship or material, the cell will be replaced at no cost to you.

WARNING: EVIDENCE OF DAMAGE DUE TO TAMPERING OR MISHANDLING WILL RENDER THE CELL WARRANTY NULL AND VOID.

The Model 3110 is designed to meet Factory Mutual standards for intrinsically safe for Class I, Division I, Groups A, B, C and D hazardous locations. (Approval pending at time of manual printing.)

This safety feature does not apply when the instrument is being charged with the 100- 240 VAC external charge adapter. The instrument should be removed from hazardous areas when the batteries are being charged.

Note: Do not use the analyzer when the battery charge is low.

1.5 Accuracy and Response

The Model 3110 provides monitoring accuracies of ±2% of full scale or ±1 ppm, whichever is greater, at constant temperature.

With a sample flow rate of 1 SCFH, a 90% response can be realized in 60 seconds. The response time on the 3110 is limited by the filter setting.

1.6 Signal Output

The standard 0-1 VDC output has a 100 ohm impedance and is suitable for driving external devices that have an input impedance of 10,000 Ω or more. The signal output is available from a port on the rear panel.

1.7 Compact Packaging

The instrument is housed in 6 1/8" × 9 ½" × 5 5/8" (156 × 241 ×

143 mm) aluminum case that is equipped with a carrying handle and foot pads. Unlike analog instruments where uneven positioning may

14 Teledyne Analytical Instruments

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Model Teledyne Analytical InstrumentsModel Ii Teledyne Analytical InstrumentsSpecific Model Information Portable Trace Oxygen AnalyzerSafety Messages Iv Teledyne Analytical InstrumentsPortable Trace Oxygen Analyzer Table of Contents Index Teledyne Analytical Instruments Maintenance & TroubleshootingAppendix List of Figures Viii Teledyne Analytical InstrumentsCombustible GAS Usage Introduction Model IntroductionIntroduction Features Portable Trace Oxygen Analyzer IntroductionIntroduction Model Micro-Fuel Cell Cell WarrantyMethod of Analysis Compact Packaging Signal OutputAccuracy and Response Portable Trace Oxygen Analyzer Introduction Intentionally left blank Charging the Batteries InstallationPortable Trace Oxygen Analyzer Installation Installation Model Gas ConnectionsPortable Trace Oxygen Analyzer Installation Sensor Installation Installing a Trace SensorCalibration Procedure for Trace Analysis CalibrationSet the Sample Flow rate Bleeding the Regulator and Purging the Gas LineExternal Signal Operation Model OperationFront Panel Interface Enter Key3 UP/DOWN Keys Portable Trace Oxygen Analyzer OperationEscape Key Operation and Setup Screens and Menus Available Menus and Their SequenceDate Screen Power on ScreenHome Screen Enter Time ScreenStandard Alarm Screen Alarm EnableFS Alarm Screen HI-LOW Alarm ScreenLtch Alarm Screen Range 1 Screen Range 2 ScreenRange Screen Span Value Screen Span ScreenFilter Screen LOG Reset & Start Screen LOG Intv ScreenLOG Transmit Screen Power Down Screen Portable Trace Oxygen Analyzer Operation Replacing the Battery Maintenance & TroubleshootingRoutine Maintenance Maintenance ModelBattery Power Supply Service Portable Trace Oxygen Analyzer MaintenanceCell Replacement Battery Charger Port on the ModelCell Warranty Temperature Compensation Effect of CO2 on B-2 Cell Life Effects of CO2 on B-2 Cell LifeLeak Testing ProcedureIntentionally left blank Appendix Model SpecificationsAppendix Spare Parts List Portable Trace Oxygen Analyzer AppendixIndex Power Down screen, 39 power off Portable Trace Oxygen Analyzer IndexAppendix Model

3110 specifications

The Teledyne 3110 is a sophisticated, high-performance data acquisition and analysis system that has garnered attention in a range of scientific and industrial applications. Designed with advanced technologies, the Teledyne 3110 is optimized for versatility, enabling users to gather and analyze data from various sources with seamless integration.

One of the main features of the Teledyne 3110 is its modular design. This allows users to customize the system to meet their specific needs by adding or removing modules as necessary. It supports a wide range of input types, making it compatible with numerous sensors and devices, which enhances its utility in diverse environments.

The device boasts high precision and accuracy in data collection, which is crucial for applications where minute measurements matter. The instrument employs cutting-edge analog-to-digital converters, ensuring that data is captured with remarkable fidelity. Additionally, the Teledyne 3110 incorporates advanced signal processing technologies that improve data quality and reduce noise, facilitating clearer and more reliable analysis results.

Another key characteristic of the Teledyne 3110 is its user-friendly interface. The system comes equipped with intuitive software for data visualization and analysis, allowing users, even those with limited technical experience, to navigate the system efficiently. With comprehensive data export options, users can easily integrate the system's outputs into other software for further analysis and reporting.

Durability and reliability are also hallmarks of the Teledyne 3110. Built to endure harsh environments, the system is tested rigorously to ensure it meets high standards for protection against dust, moisture, and temperature variations. This robustness makes it applicable in fields such as environmental monitoring, industrial automation, and research laboratories.

Furthermore, the Teledyne 3110 supports real-time monitoring and data logging capabilities. This feature is essential for applications that require continuous oversight and data collection to respond promptly to any changes in conditions or parameters being monitored.

In summary, the Teledyne 3110 stands out as a versatile and reliable data acquisition system, leveraging modularity, precision, user-friendliness, and durability to serve a variety of applications effectively. Whether for research, industrial applications, or environmental monitoring, the Teledyne 3110 proves to be an invaluable tool for professionals seeking high-quality data insights.
Top Page Image Contents