Teledyne 3300TB operating instructions Analog Outputs, RS-232 Port

1 Introduction Model 3300TB

•Power Connection AC version: 100–240 VAC, at 50/60Hz. The connector housing includes the fuse holder and the power switch.

	Fuse Holder: Replacing the fuse is
	described in Chapter 5, Maintenance.
	I/O Power Switch: Turns the instrument
	power ON (1) or OFF (0).
• Analog Outputs	0–10 V dc concentration output.
	0–10 V dc range ID (or optional overrange)
	output.
	4–20 mA dc concentration output, negative
	ground.

•Alarm Connections Alarm 1, Alarm 2, and Sensor Failure Alarm connections.

•Sensor Connector Internal Sampling System, Sensor Connector.

• RS-232 Port	Serial Digital Output of concentration and
	rangesignals.

1-4 Teledyne Analytical Instruments