Trace Oxygen Analyzer | Appendix | |
|
|
|
|
|
|
|
|
|
Section V – Emergency and First Aid Procedures
Eye Contact: Flush eyes with water for at least 15 minutes and get im- mediate medical attention.
Skin Contact: Wash affected area with plenty of water and remove contaminated clothing. If burning persists, seek medical attention.
Ingestion: Give plenty of cold water. Do not induce vomiting. Seek medical attention. Do not administer liquids to an unconscious person.
Inhalation: Liquid inhalation is unlikely.
Section VI – Handling Information
NOTE: The oxygen sensors are sealed, and under normal circumstances, the contents of the sensors do not present a health hazard. The following information is given as a guide in the event that a cell leaks.
Protective clothing: Rubber gloves, chemical splash goggles.
Protective measures
during cell replacement:Before opening the bag containing the sensor cell, check the sensor cell for leakage. If the sen- sor cell leaks, do not open the bag. If there is liquid around the cell while in the instrument, put on gloves and eye protection before remov- ing the cell.
Disposal: | Should be in accordance with all applicable |
| state, local and federal regulations. |
NOTE: The above information is derived from the MSDS provided by the manufacturer. The information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. Teledyne Analytical Instruments shall not be held liable for any damage resulting from handling or from contact with the above product.
Teledyne Analytical Instruments |