Teledyne 3300TB operating instructions Appendix Specifications, Trace Oxygen Analyzer Appendix

Trace Oxygen Analyzer Appendix

Appendix

A.1 Specifications

Ranges:	Two user selectable ranges can be set
	between 0-10 ppm and 0-9999 ppm
	oxygen, and a 0-25 % (nominal) Air Cali-
	bration Range.
SignalOutput:	Voltage: 0–10 V dc, negative ground
	Current: 4-20 mA, negative ground
Range ID:	0-10 V dc.
Display:	Light emitting diode (LED)display.
Alarms:	One high alarm relay, adjustable; one low
	alarm relay, adjustable; one sensor failure
	relay. (All are failsafe.)
System Operating Temp:	0-50 °C
Accuracy:	±2 % of full scale at constant temperature
	±5 % of full scale through operating tem-
	perature range (At 100 ppm and higher user
	defined ranges) once temperature equilib-
	rium is reached.
	±1 ppm for 10 ppm range under above
	conditions.
Response Time:	90 % in less than 65 seconds at 25 °C
	(68 °F).
System Power Requirement:	AC (100-240 VAC, 50/60Hz), or
	DC (10-36 VDC); user specified.
System Enclosure:	Wall Mount, NEMA -4 Enclosure:
	16.40" H × 8.0" W × 6.0" D (416.56 mm ×
	203.2 mm × 152.40 mm).

Teledyne Analytical Instruments A-1