INSTALLING BATTERIES
1.The battery cover is located 1. along the left side of the monitor. Remove battery cover by pressing down
and pulling away from the monitor.
2.Install batteries according to the polarity indications inside
the compartment (as shown 2. in fig. 2). Battery Type: 2
Alkaline LR03 (AAA) size
3.Replace the cover by inserting it back into place.
Replace the batteries if:
1. The weak battery3. symbol appears in
the display.
2.Nothing appears in the display when the power is switched on.
Replace all batteries at one time (as simultaneous set). Use only 1.5V AAA alkaline batteries. Remove batteries when unit is not in use for extended periods of time. Date and time will need to be reset if batteries are removed or replaced. Clean contacts on battery and in battery compartment with a soft dry cloth each time you install batteries.
11
Note: Batteries are hazardous waste. Do not dispose of them together with the household garbage.
DATE/TIME SET PROCEDURE
1.To adjust the date/time, press the Set button
. The display will show a blinking number showing the month.
2.Change the month by pressing the 
button. Each press will increase the number by one in a
cycling manner. Press the Set button 
again to confirm the entry, and the screen will show a blinking number representing the day of the month.
3.Change the date and time as described in
Step 2 above, using the 
button to change the numbers and the Set button 
to confirm the entries.
Press the 
button
blinking month
increasing month
confirm the entry
repeat process to set date and time
12
12/22/09 12:37 PM