MEASUREMENT PROCEDURE
Important Notes:
•Position the monitor at the same level as your heart during measurement to ensure accurate readings.
•Blood pressure changes with every heartbeat and is in constant fluctuation throughout the day.
•Blood pressure measurement can be affected by the position of the user, his or her physiologic condition and other factors. For greatest accuracy, wait 1 hour after exercising, bathing, eating, drinking beverages with alcohol or caffeine, or smoking to measure blood pressure.
•Before measurement, it is suggested that you sit quietly for 15 minutes as measurements taken during a relaxed state will have greater accuracy. You should not be physically tired or exhausted while taking a measurement.
•During the measurement, do not talk or move your arm or hand muscles.
•See page 20 for additional notes regarding your blood pressure measurement
If you are using this blood pressure monitor for the first time, please remove the protective film from the screen.
15
1. With the cuff wrapped around your wrist, press the START/STOP button. Do not inflate the cuff unless it is wrapped around your wrist. All digits will light up, checking the display functions. The checking procedure will be completed after about 2 seconds.
|
| T/S | T |
| R | ||
| A |
| O |
S | T |
| P |
2. After all symbols disappear, the display will show a blinking “0”. The monitor is “Ready to Measure” and will automatically inflate the cuff to begin measurement. The cuff will then begin deflating as measurement continues.
Note: The monitor will
body requires more pressure for measurement.
16
12/22/09 12:37 PM