HoMedics PP-BPCUFF5, IB-BPA060A, BPA-060 manual Installing Batteries, Replace the batteries if

Page 7

INSTALLING BATTERIES

1.Press down on latch and lift the battery cover to open the battery compartment.

2.Install or replace 4 “AA” sized batteries in the battery compartment according to the indications inside the compartment.

3.Close the battery cover by pushing in the top end

of the battery door.

Battery

Cover

Replace the batteries if:

1.The weak battery symbol appears on the display.

2.Nothing appears on the display when the power is

switched on.

As the supplied batteries are for test only, they may be dis- charged earlier than batteries you buy in stores. Replace the batteries in pairs. Use only 1.5V AA alkaline batteries. Remove batteries when unit is not in use for extended peri- ods of time. Date and time will need to be reset if batteries are removed or replaced.

Note: Batteries are hazardous waste. Do not dispose of them together with the household garbage.

USING THE AC ADAPTER (NOT INCLUDED)

This monitor is designed for operation with batteries or an optional AC adapter. Please use only a compatible,

UL approved AC adapter with required voltage and current as indicated in this manual. Contact HoMedics Consumer Relations at 1-800-466-3342 to purchase a compatible AC adapter.

Note: • Please unload the batteries when operating with the AC adapter for an extended period of time. Leaving the batteries in the compartment for a long time may cause leakage, which may lead to damage of the unit.

•No batteries are needed when operating with the AC adapter.

•Date and time will need to be reset if AC adapter is unplugged.

1.Connect the AC adapter with the AC adapter jack in the back of the unit as shown below.

2.Please use only the AC adapter included with this monitor.

AC Adapter

Input: 100-240V~0.2A 50/60Hz

Output: 6V DC 500mA 3 W Max

Connect AC adapter here

11

12

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Deluxe Automatic Blood Pressure Monitor Table of Contents Important Product Notices and Safety Instructions Systolic mmHg Diastolic mmHg About Blood PressureNAME/FUNCTION of Each Part HOW this Blood Pressure Monitor WorksDisplay Explanations Display SymbolsUsing the AC Adapter not Included Installing BatteriesReplace the batteries if Colored Arrow Date & Time SET Procedure Using the ARM CuffPlug the cuff tube into the left side of the unit Important Notes Measurement ProcedureMeasurement is then automatically stored into memory Risk Category IndicatorImportant Notes Regarding Your Blood Pressure Measurement Recalling Values from MemoryClearing Values from Memory Press and hold the Date & Time set buttonsCARE, Maintenance & Cleaning Potential for Electromagnetic Interference Specifications TroubleshootingDe Lugo Monitor Automático de Presión Sanguínea Información DE USO Información InicialAvisos Importantes DEL Producto E Instrucciones DE Seguridad Sobre LA Presión Sanguínea NOMBRE/FUNCIÓN DE Cada Pieza Cómo Funciona Este Monitor DE Presión SanguíneaSímbolos de la pantalla Explicaciones DE LA PantallaUSO DEL Adaptador DE CA no Incluido Instalación DE LAS PilasUSO DEL Brazalete Procedimiento DE Configuración DE Fecha Y HoraBotón Set Nota Notas importantes Procedimiento DE MediciónLa medida se almacenará automáticamente en la memoria Nota Indicador DE Catergoria DE RiesgoMantenga presionado los botones de fecha y tiempo Cómo Recuperar LOS Valores DE LA MemoriaCómo Borrar LOS Valores DE LA Memoria Cada usuario puede almacenar hasta 50 medicionesCUIDADO, Mantenimiento Y Limpieza Potencial DE Interferencia Electromagnética Especificaciones Diagnóstico Y Resolución DE Problemas
Top Page Image Contents