|
| Troubleshooting Guide | 6 |
| |
|
|
|
|
|
|
THERMOMETER |
|
|
| ||
|
|
|
|
|
|
|
| Problem | Solution |
|
|
|
| The thermometer does 1a. | Properly install fresh batteries. |
|
|
|
| not turn on (No Display) |
|
|
|
|
| 1b. | If operating under ac power, check | ||
|
|
| that the ac adapter is plugged in | ||
|
|
| properly to the ac wall outlet and to the | ||
|
|
| thermometer. |
|
|
|
| 1c. | Make sure the batteries make good | ||
|
|
| contact - remove and reinstall the | ||
|
|
| batteries. |
|
|
2. | Make sure that the trigger is pulled | ||||
|
|
| completely. |
|
|
|
|
|
|
|
|
1.Reset the thermometer. It sets all of the parameters to the default values and restores calibration. The procedure is as follows, when the thermometer is in sleep mode:
a.Press and hold the key.
b.Pull the trigger.
c.Release the trigger.
d.Release the key.
e.The version of the software is displayed for about 1 second. The emissivity display mode immediately follows with the emissivity of 0.95.
- The |
| icon | 1. | Properly install fresh batteries. |
flashes.
-The thermometer beeps intermittently.
-The thermometer
flashes “ “ in the Main Display.