SECTION 1—GENERAL GUIDELINES
Ensure that the seat is locked in the FORWARD position before and during the operation of the scooter. Otherwise, injury to the user and/or damage to the scooter may result.
DO NOT adjust the seat position outside the specifications recommended by the manufacturer.
Ensure that the tiller is properly adjusted before driving the scooter.
After making any tiller angle adjustment and before use, the tiller must be securely locked into position. Otherwise that user may fall from the scooter resulting in bodily harm and/ or damage to the scooter. Gently push/pull the tiller to ensure that the tiller is securely engaged.
DO NOT overtighten hardware attaching to the frame. This could cause damage to the frame tubing.
Do determine and establish your particular safety limits by practicing bending, reaching and transferring activities in the presence of a qualified healthcare professional BEFORE attempting active use of the powered scooter.
ALWAYS DO keep hands and fingers clear of moving parts to avoid injury.
ALWAYS DO wear your seat positioning strap.
The seat positioning strap is a positioning belt ONLY. It is not designed for use as a safety device withstanding high stress loads such as auto or aircraft safety belts. If signs of wear appear, belt must be replaced immediately.
ALWAYS DO check hand grips for looseness before using the powered scooter. If loose and/or worn, replace immediately.
Avoid storing or using the scooter near external flame or combustible products. Serious injury or damage to property may result.
TIRE PRESSURE
DO NOT use your powered scooter unless it has the proper tire pressure (P.S.I.). DO NOT overinflate the tires. Failure to follow these recommendations may cause the tire to explode and cause bodily harm. The recommended tire pressure is listed on the side wall of the tire.
ELECTRICAL
Check to ensure that all electrical connections are secure at all times.
Part No. 1118395 | 15 | 300 and 400 |