Invacare HMV Highly 300, HMV Highly 400 manual REMOVING/INSTALLING the Batteries on

SECTION 12—BATTERIES

7.Connect the RED and BLACK battery connector to the wiring harness assembly. Tighten securely.

8.Secure batteries in the battery tray using the battery strap (Detail “A” of FIGURE 12.2).

9.Reinstall the rear shroud. Refer to Removing/Installing the Rear Shroud on page 44.

10.Reinstall the seat. Refer to Removing/Installing the Seat on page 34.

NOTE: New batteries MUST be fully charged BEFORE using, otherwise the life of the batteries will be reduced.

11. If necessary, charge the batteries. Refer to Charging the Batteries on page 58.

DETAIL “A” - REMOVING/INSTALLING THE BATTERIES

Batteries

Batteries BatteryBattery Tray Removed

Installed Strap

Battery

Tray

NOTE: Seat and Rear Shroud not shown for clarity.

DETAIL “B” - BATTERY WIRING HARNESS

RED and BLACK

Battery Connector

50Amp Fuse
POSITIVE (+) RED	RIGHT	LEFT	WHITE Battery
Battery Cable	BATTERY	BATTERY	Cable (Jumper)
			NEGATIVE (-) BLACK
			Battery Cable
POSITIVE (+) RED
Battery Terminal			NEGATIVE (-) BLACK
			Battery Terminal
NEGATIVE (-) BLACK			POSITIVE (+) RED
Battery Terminal			Battery Terminal

FIGURE 12.2 - REMOVING/INSTALLING THE BATTERIES ON 300

300 and 400 52 Part No. 1118395