SECTION
❑Check that the wheel lock pivot points are free of wear and looseness.
❑Inspect seat and back for loose or broken hardware.
❑Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
❑Inspect back cane hand grips for wear/looseness/deterioration.
❑Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a stop.
❑Ensure wheel bearings are clean and free of moisture.
❑Check headtube locknuts for tightness.
❑Ensure casters are free of debris.
❑Make sure detent balls of the quick‐release pin are fully released before operating the wheelchair.
❑The detent balls MUST be protruding past the top of the seat plate assembly for a positive lock.
❑Keep detent balls clean.
Inspect/Adjust Periodically
❑Inspect frame and crossbraces for loose or missing hardware.
❑Inspect for bent frame or crossbraces.
❑Check that wheel locks are easy to engage.
❑Inspect seat and backs for rips and sagging.
❑Check that there is no excessive side movement or binding in the rear wheels when lifted and spun.
❑Inspect handrims for signs of rough edges or peeling.
❑Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a stop.
❑Ensure wheel bearings are clean and free of moisture.
❑Inspect casters for cracks and wear.
❑Clean upholstery and armrests.
❑Check that all labels are present and legible. Replace if necessary.
❑Ensure casters are free of debris.
❑Make sure detent balls of the quick‐release pin are fully released before operating the wheelchair.
❑The detent balls MUST be protruding past the top of the seat plate assembly for a positive lock.
❑Keep detent balls clean.