SECTION
Seat Rail | Locknut |
|
Telescoping
Tube
Mounting
Screw
FIGURE 5.13 Installing/Removing/Adjusting the Telescoping Front Frame Tubes
Optional Footrest Accessories
Replacing Heel Loop
Composite Footplates
NOTE: For this procedure, refer to FIGURE 5.14.
1.Remove the mounting screw and coved washer that secures the lower footrest assembly to the swingaway footrest assembly.
2.Remove the lower footrest assembly.
3.Remove the mounting screws and locknuts that secure the heel loop to the footrest.
4.Slide existing heel loop up and off slide tube.
5.Slide new heel loop onto slide tube.
6.Reverse STEPS 1‐4 to reassemble.
NOTE: When securing the heel loop to the footrest assembly, tighten the phillips screw and locknut until the spacer is secure.
Swingaway Footrest
Assembly
Mounting screw/ |
| |
Coved Washer | Mounting Screw | |
| ||
Slide | Spacer | |
Tube |
| |
| Heel Loop | |
| Footplate | |
Lower Footrest | Locknut | |
Assembly | ||
|