Invacare 1073955 manual Transport Ready Option

Page 76

SECTION 12—TRANSPORT READY OPTION

SECTION 12—TRANSPORT READY OPTION

WARNING

Contact Invacare Corporation (800-333-6900) with any questions about using this wheelchair for seating in a motor vehicle.

When feasible, wheelchair occupants should transfer into the vehicle seat and use the OEM (Original Equipment Manufacturer) vehicle-installed restraint system.

This wheelchair has been dynamically tested in a forward-facing mode with the specified crash test dummy restrained by both pelvic and upper-torso belt(s) (shoulder belts), and that BOTH pelvic and upper torso belt(s) should be used to reduce the possibility of head and chest impacts with vehicle components.

Use ONLY Wheelchair Tie-down and Occupant Restraint Systems (WTORS) which meet the requirements of the SAE (Society of Automotive Engineers) J2249 Recommended Practice during travel in a motor vehicle.

This wheelchair MUST be in a forward facing position during travel in a motor vehicle.

This wheelchair is equipped, and has been dynamically tested to rely on wheelchair- anchored pelvic belts. if desired, vehicle-anchored pelvic belts may be used.

It is strongly recommended that both pelvic and upper-torso belt(s) be used to reduce the risk of injury.

To reduce the potential of injury to vehicle occupants, wheelchair-mounted accessories, including but not limited to IV poles, trays, respiratory equipment, backpacks, and other personal items should be removed and secured separately.

Postural supports, positioning devices, and/or strap(s) should not be relied on for occupant restraint. These items may be used in addition to the wheelchair- anchored or vehicle-anchored belts.

DO NOT alter or substitute wheelchair frame parts, components, or seating systems.

A sudden stop and/or collision may structurally damage your wheelchair. Wheelchairs involved in such incidents should be replaced.

Transport ready packages are not retrofittable to existing models and are not field serviceable.

Only use the transport brackets included with TRRO for the purposes described in this manual.

Orbit

76

Part No. 1073955

Image 76
Contents Orbit Orbit Table of Contents Front Riggings Options Register Your Product Complete and mail the form on the nextProduct Registration Form City State/ProvinceFold here Cut Along Line Special Notes Wheelchair TIE-DOWN Restraints and Seat RestraintsLabel Location Standard LabelsWheelchairs with Trro Typical Product Parameters Minimum MaximumInformation for Healthcare Professionals/Assistants General GuidelinesStability All Models Anti-Tippers Operating InformationWeight Limitation Weight TrainingTire Pressure Safety/Handling of Wheelchairs SAFETY/HANDLING of WheelchairsStability and Balance Coping With Everyday Obstacles Reaching, Leaning and Bending Forward Reaching and Leaning BackwardsTipping Do not tip the wheelchair without assistanceMethod 1 Wheelchair With Step Tubes Method 2 Wheelchair Without Step TubesStairways StairwaysEscalators Transferring To and From Other SeatsSafety Inspection Checklist Safety INSPECTION/TROUBLESHOOTINGInspect/Adjust Initially Inspect/Adjust Weekly Inspect/Adjust MonthlyInspect/Adjust Periodically Troubleshooting MaintenanceMaintenance Safety Precautions Suggested Maintenance ProceduresSafety INSPECTION/TROUBLESHOOTING Assembling/Disassembling the Removable Orbit Wheelchair AssemblyAssembling the Seat Frame to the Base Frame Disassembling the Seat Frame from the Base Frame Assembling/Disassembling the Removable Orbit Wheelchair Installing/Removing Front Riggings Installing Front RiggingsFront Riggings Removing Front RiggingsAdjusting Pivot Slide Tube Height Adjusting Footplate HeightAdjusting Footplate Height 70 MFX and 90 Footrests Only Installing 3-Inch Extension Adjusting Footplate Height MFX and 90 Footrests OnlyInstalling Elevating Legrest Adjusting Elevating LegrestAdjusting Depth on Adjustable Angle Flip-Up Installing Adjustable Angle Flip-up FootplateAdjusting Angle on Adjustable Angle Flip-up Footplate Bilateral Contracture Platform Procedures Installing Bilateral Contracture PlatformAdjusting Height of Bilateral Contracture Platform Removing Bilateral Contracture PlatformAdjusting Bilateral Contracture Platform Footplate Depth Adjusting Bilateral Contracture Platform AngleReplacing Sector Block Installing/Removing Telescoping Front Frame Tubes Adjusting Telescoping Front Frame TubesReplacing Heel Loop Optional Footrest AccessoriesComposite Footplates Adjustable Footplate 15 Replacing Heel Loop Adjustable FootplateInstalling the T-Arm Sockets ArmsInstalling T-Arms Installing/Removing the T-armsRemoving T-Arms Adjusting T-Arm Height Adjusting the T-ArmsAdjusting T-Arm Width Adjusting T-Arm Depth Adjusting the T-Arms- Adjusting T-Arm WidthAdjusting T-Arm Sockets Adjusting the T-Arms- Adjusting T-Arm DepthAdjusting the Transfer Assists and/or Side Guards Adjusting the T-Arms- Adjusting T-Arm SocketsAdjusting the Transfer Assists and/or Side Guards Replacing the T-Arm Locking LeverUsing/Installing/Adjusting Cantilever Arms Using Catilever ArmsInstalling/Removing/Adjusting Catilever Arms Using/Installing/Adjusting Cantilever ArmsAngled Portion Locking Mechanism Adjustment Replacing and Adjusting Arm Pad Depth for Cantilever ArmsReplacement Seat and Back Replacing the Locking Mechanism in the Back CaneInstalling Fixed Height Stroller Handles Installing Adjustable Angle Stroller HandlesRemoving Adjustable Angle Stroller Handles Adjusting Adjustable Angle Stroller HandlesRemoving/Installing the Spreader Bar Adjusting Adjustable Angle Stroller HandlesRemoving/Installing the Spreader Bar Folding/Unfolding the Back CanesInstalling RemovingReplacing/Installing Front Caster Assemblies Front CastersReplacing Front Fork Replacing Front ForkAdjusting Caster Headtubes Adjusting Caster HeadtubesRemoving/Installing Rear Wheels Rear WheelsQuick-Release Axles Permanent AxlesAdjusting the Quick-Release Axle Removing/Installing Rear WheelsInstalling Non-Projection Handrims Replacing HandrimsNon-Projection Handrims Projection HandrimsInstalling Projection Handrims Removing Projection HandrimsFoot Activated Wheel Lock Procedures Installing/Removing Foot Activated Wheel LocksUsing Foot Activated Wheel Locks ANTI-TIPPERS/WHEEL LocksHand Activated Wheel Lock Procedures Installing/Removing Hand Activated Wheel LocksAdjusting the Wheel Lock Engaging/Disengaging Hand Activated Wheel LocksInstalling Anti-Tippers Adjusting the Wheel LockAdjusting Anti-Tippers Adjusting Anti-TippersRecliner Engaging Tilt-In-SpaceRecliner Operating Recliner Engaging Tilt-In-SpaceAdjusting Limit Stops of the Tilt Mechanism Adjusting Anterior Forward Limit StopsAdjusting Posterior Rearward Limit Stops Replacing Upholstery Recliner Models OnlyReplacing the Back Upholstery Replacing the Headrest UpholsteryAdjusting the Back Height Recliner Models Only Replacing Upholstery Recliner Models OnlyTransport Ready Option Specifications Weight LimitAbout Transport Ready Packages Compliance InformationSecuring the Wheelchair to the Vehicle Positioning the Wheelchair in the VehicleSecurement Points Securing the WheelchairVehicle-Anchored Belts Securing the OccupantSeating System Positioning Belts Positioning BeltsUsing the Ventilator Tray OptionsLimited Warranty USA