Invacare 1073955 manual Operating Recliner, Engaging Tilt-In-Space

SECTION 11—RECLINER

Release

Pedal

Wheelchair

Frame

Unlocked Position

(DISENGAGED)

Locked Position

(ENGAGED)

NOTE: Illustration depicts two cables for dual tilt mechanisms. Locking mechanism engages/dise in the same manner for single tilt mechanism.

Non-recliner Models Recliner Models

FIGURE 11.1 Engaging Tilt-In-Space

Operating Recliner

WARNING

Pinch Points exist between spreader bar and gas cylinders. Use caution, otherwise injury may occur.

NOTE: For this procedure, refer to FIGURE 11.2 on page 73.

1.Make sure the wheelchair is on a level surface.

2.Engage the wheel locks. Refer to Hand Activated Wheel Lock Procedures on page 66 or Foot Activated Wheel Lock Procedures on page 65.

3.Inform the occupant of the wheelchair that the wheelchair is about to be reclined.

4.Stand behind the wheelchair and grasp the stroller handle firmly.

5.Pull up on the handles of the recliner cable assemblies to activate the gas cylinders.

6.Slowly, squeeze the handles of the recliner cable assemblies and allow the back to recline to the desired angle.

Orbit™ 72 Part No. 1073955