Invacare 1073955 manual Angled Portion Locking Mechanism

Page 50

SECTION 6—ARMS

Replacing/Repositioning the Locking Mechanism in the Cantilever Arm

NOTE: For this procedure, refer to FIGURE 6.10 on page 50.

CAUTION

The locking mechanism is spring loaded. Place your free hand over the locking mechanism to prevent parts from springing out of the armrest.

1.Move the cantilever arm up and out of the way.

2.Unthread the actuator from the locking mechanism and remove.

3.Slowly let the locking mechanism and spring slide out of the cantilever arm.

NOTE: Inspect the spring for wear and damage. Replace if necessary.

4.Slide the new locking mechanism and spring into the cantilever arm.

5.Position the angled portion of the locking mechanism in one of two ways:

•Angled Portion Facing Up ‐ Arm will flip up

•Angled Portion Facing Down ‐ Arm will flip down

6.Use Loctite 242 and securely tighten the actuator into the locking mechanism.

7.To lock the cantilever arm, push down (or pull up) until there is an audible click.

8.Pull up (or push down) on the cantilever arm to make sure it is locked in place.

Angled Portion of

Locking Mechanism

Locking		Spring
		Spring

Mechanism

Cantilever Arm

Actuator

(Apply Loctite 242)

FIGURE 6.10 Replacing/Repositioning the Locking Mechanism in the Cantilever Arm

Orbit ™

50

Part No. 1073955

Image 50

Contents Orbit Orbit Table of Contents Front Riggings Options Register Your Product Complete and mail the form on the nextProduct Registration Form City State/ProvinceFold here Cut Along Line Special Notes Wheelchair TIE-DOWN Restraints and Seat RestraintsLabel Location Standard LabelsWheelchairs with Trro Typical Product Parameters Minimum MaximumStability All Models General GuidelinesInformation for Healthcare Professionals/Assistants Anti-Tippers Operating InformationTire Pressure Weight TrainingWeight Limitation Stability and Balance SAFETY/HANDLING of WheelchairsSafety/Handling of Wheelchairs Coping With Everyday Obstacles Tipping Reaching, Leaning and Bending ForwardReaching and Leaning Backwards Do not tip the wheelchair without assistanceMethod 1 Wheelchair With Step Tubes Method 2 Wheelchair Without Step TubesStairways StairwaysEscalators Transferring To and From Other SeatsInspect/Adjust Initially Safety INSPECTION/TROUBLESHOOTINGSafety Inspection Checklist Inspect/Adjust Weekly Inspect/Adjust MonthlyInspect/Adjust Periodically Maintenance Safety Precautions TroubleshootingMaintenance Suggested Maintenance ProceduresSafety INSPECTION/TROUBLESHOOTING Assembling the Seat Frame to the Base Frame AssemblyAssembling/Disassembling the Removable Orbit Wheelchair Disassembling the Seat Frame from the Base Frame Assembling/Disassembling the Removable Orbit Wheelchair Front Riggings Installing/Removing Front RiggingsInstalling Front Riggings Removing Front RiggingsAdjusting Footplate Height 70 MFX and 90 Footrests Only Adjusting Footplate HeightAdjusting Pivot Slide Tube Height Installing 3-Inch Extension Adjusting Footplate Height MFX and 90 Footrests OnlyInstalling Elevating Legrest Adjusting Elevating LegrestAdjusting Angle on Adjustable Angle Flip-up Footplate Installing Adjustable Angle Flip-up FootplateAdjusting Depth on Adjustable Angle Flip-Up Bilateral Contracture Platform Procedures Installing Bilateral Contracture PlatformAdjusting Height of Bilateral Contracture Platform Removing Bilateral Contracture PlatformReplacing Sector Block Adjusting Bilateral Contracture Platform AngleAdjusting Bilateral Contracture Platform Footplate Depth Installing/Removing Telescoping Front Frame Tubes Adjusting Telescoping Front Frame TubesComposite Footplates Optional Footrest AccessoriesReplacing Heel Loop Adjustable Footplate 15 Replacing Heel Loop Adjustable FootplateInstalling the T-Arm Sockets ArmsRemoving T-Arms Installing/Removing the T-armsInstalling T-Arms Adjusting T-Arm Width Adjusting the T-ArmsAdjusting T-Arm Height Adjusting T-Arm Depth Adjusting the T-Arms- Adjusting T-Arm WidthAdjusting T-Arm Sockets Adjusting the T-Arms- Adjusting T-Arm DepthAdjusting the Transfer Assists and/or Side Guards Adjusting the T-Arms- Adjusting T-Arm SocketsAdjusting the Transfer Assists and/or Side Guards Replacing the T-Arm Locking LeverUsing/Installing/Adjusting Cantilever Arms Using Catilever ArmsInstalling/Removing/Adjusting Catilever Arms Using/Installing/Adjusting Cantilever ArmsAngled Portion Locking Mechanism Replacement Replacing and Adjusting Arm Pad Depth for Cantilever ArmsAdjustment Seat and Back Replacing the Locking Mechanism in the Back CaneInstalling Fixed Height Stroller Handles Installing Adjustable Angle Stroller HandlesRemoving Adjustable Angle Stroller Handles Adjusting Adjustable Angle Stroller HandlesRemoving/Installing the Spreader Bar Adjusting Adjustable Angle Stroller HandlesRemoving/Installing the Spreader Bar Folding/Unfolding the Back CanesInstalling RemovingReplacing/Installing Front Caster Assemblies Front CastersReplacing Front Fork Replacing Front ForkAdjusting Caster Headtubes Adjusting Caster HeadtubesQuick-Release Axles Removing/Installing Rear WheelsRear Wheels Permanent AxlesAdjusting the Quick-Release Axle Removing/Installing Rear WheelsNon-Projection Handrims Installing Non-Projection HandrimsReplacing Handrims Projection HandrimsInstalling Projection Handrims Removing Projection HandrimsUsing Foot Activated Wheel Locks Foot Activated Wheel Lock ProceduresInstalling/Removing Foot Activated Wheel Locks ANTI-TIPPERS/WHEEL LocksHand Activated Wheel Lock Procedures Installing/Removing Hand Activated Wheel LocksAdjusting the Wheel Lock Engaging/Disengaging Hand Activated Wheel LocksInstalling Anti-Tippers Adjusting the Wheel LockAdjusting Anti-Tippers Adjusting Anti-TippersRecliner Engaging Tilt-In-SpaceRecliner Operating Recliner Engaging Tilt-In-SpaceAdjusting Limit Stops of the Tilt Mechanism Adjusting Anterior Forward Limit StopsReplacing the Back Upholstery Adjusting Posterior Rearward Limit StopsReplacing Upholstery Recliner Models Only Replacing the Headrest UpholsteryAdjusting the Back Height Recliner Models Only Replacing Upholstery Recliner Models OnlyTransport Ready Option About Transport Ready Packages SpecificationsWeight Limit Compliance InformationSecuring the Wheelchair to the Vehicle Positioning the Wheelchair in the VehicleSecurement Points Securing the WheelchairSeating System Securing the OccupantVehicle-Anchored Belts Positioning Belts Positioning BeltsUsing the Ventilator Tray OptionsLimited Warranty USA