Grinding Attachments
Available grinding attachments are used for grinding surface imperfections or joints.These attachments allow greater utilization of your trowel.Figure 36 illustrates a typical grinding disk assembly, complete with hub and stone mounting plate.
Figure 36. Grinding Disk
Lifting Bale
There is a heavy duty, center balance type lifting bale (Figure 37) made specifically for your trowel. These bales are ideal for lifting and transporting your trowel.They are designed to lift the finisher and balance it on it’s center of gravity, providing great stability while lifting.This option is not available on electric trowel models.
Figure 37. Lifting Bale
J-SERIESTROWEL — OPTIONS
Trowel Arm Adjustment Tool
If blades show uneven wear patterns or some tend to wear out faster than others, the trowel arms may need to be adjusted. Whiteman makes a special tool (Figure 38) that will adjust all of the trowel arms consistently.The Trowel Arm Fixture P/N is 1817.
Figure 38.Trowel Arm Adjustment Fixture
PAGE 30 —