Replacing Belt
Motor Shaft |
Arbre du moteur |
Eje del motor |
Belt |
Courroie |
Correa |
Agitator |
Agitateur |
Agitador |
Motor Shaft |
Arbre du moteur |
Eje del motor |
Belt Groove |
Rainure de la courroie |
Polea para correa |
End Cap |
|
| |
Bouchon |
|
| |
Tapa del |
|
| |
extremo |
|
| |
Slot | Agitator | Nozzle | |
Agitateur | |||
Fente | |||
Tête d'aspiration | |||
Agitador | |||
Ranura | |||
Boquilla | |||
| |||
|
|
➢Replace belt whenever a burning rubber smell caused by excessive slippage occurs.
➢Remove lower plate. See “Removing and Installing Lower Plate”
➢Remove agitator by carefully lifting out.
➢Remove worn or broken belt.
➢Clean agitator and the end caps.
➢Loop new belt around motor shaft and agitator belt groove; see illustration for correct belt routing.
➢Reinstall agitator back into nozzle housing grooves.
➢After reinstalling the agitator, turn it by hand to make sure that belt is not twisted or pinched and that all rotating parts turn freely.
➢Reinstall lower plate. Ensure tabs are locked into slots.
- 48 -