Removing Clogs
If the vacuum cleaner does not seem to have adequate suction, first check if the dust bin is full or if a filter is clogged.
➢ Check the handle and extension wand area.
➢ Remove handle by pressing handle quick release button.
➢Visually inspect the hose and the base area into which the hose is connected.
➢Remove any visible clog.
➢ Plug in the vacuum cleaner and turn it on.
➢Stretch the hose to maximum length
and then allow the hose to return to its storage length.
➢ Turn off and unplug the vacuum cleaner.
➢ Remove dust bin and check for clogs.
➢If the dust bin and filter areas and the hose areas are free of clogs, check the nozzle area.
➢ Check the clean out port.
➢ Return the vacuum cleaner to the upright position before plugging into an electrical outlet.
- 54 -