Panasonic MC-UG787 manuel dutilisation Overload Protection, Thermal Protector

Page 20

Overload Protection

OVERLOAD

PROTECTION RESET button Bouton de remise

en circuit de la protection de surcharge Protector contra sobrecargas (Botón de restauración)

➢The OVERLOAD PROTECTION RESET button stops the nozzle motor when the brush jams to prevent belt breakage.

NOTE: The vacuum cleaner motor will continue to run.

TO CORRECT PROBLEM:

➢Unplug electrical cord.

➢Check nozzle areas for excessive lint buildup or jamming.

➢Clean jammed area.

TO RESET:

➢Press reset button on top of the nozzle. Plug in and turn on vacuum cleaner.

Thermal Protector

➢If a clog prevents the normal flow of air to the motor, the thermal protector turns the motor off automatically to allow the motor to cool in order to prevent possible damage to the vacuum cleaner.

➢To correct problem, turn off and unplug vacuum cleaner, remove clogs, and/or clean/replace filters.

➢Replace full bag if necessary.

➢Wait approximately thirty (30) minutes, plug vacuum cleaner in, and turn on to see if thermal protector has reset. Thermal protector will not reset if vacuum cleaner is not turned off even if vacuum cleaner cools down.

- 20 -

Image 20

Contents MC-UG787 Consumer Information Avertissement Advertencia Cuidado Important Safety Instructions Avertissement Advertencia Table of Contents Table des matières Tabla de contenidoParts Identification Feature Chart Tableau des caractéristiquesPower Cord Attaching HandleMontage du manche Colocación del mangoCordon d’alimentation Cordón eléctricoTool Storage Rangement des accessoires Almacenaje de herramientasCarpet/Floor Selector Automatic Self Adjusting NozzleEdge Cleaning Limpieza para orillas Boquilla de ajuste automáticoSelector alfombra-piso Performance Indicator Dirt SensorIndicateur de performance Indicador del funcionamientoDétecteur de poussière Sensor de basuraOverload Protection Thermal ProtectorProtecteur de surcharge Protector contra sobrecargasProtecteur thermique Protector termalMotor Protector Extension WandProtecteur du moteur Protector de motorTube Télescopique Tubo TelescópicoTo Operate Vacuum Cleaner Power Cord Using Cord HookCrochet de rangement du cordon Uso del sujetador del cordónON-OFF Switch Handle AdjustmentInterrupteur Control ON-OFFRéglage de l’inclinaison du boîtier Ajustes del mangoUsing Tools Utilisation des accessoires Uso de herramientasReplacing Hepa Filter Replacing Secondary FilterRemplacement du filtre De type Hepa Remplacement du filtre SecondaireCambiando el filtro Hepa Cambiando el filtro secundarioChanging Dust Bag Remplacement du sac à poussière Cambio de la bolsa para polvoRemoving and Installing Lower Plate Enlèvement et installation de la Plaque inférieure Remover y reinstalar la base inferiorReplacing Headlight Bulb Remplacement de l’ampoule De la lampe Cambio de la bombillaReplacing Belt Remplacement de la courroie Cambio de la correaCleaning Dirt Sensor Optics Nettoyage des cellules optiques du Détecteur de poussière Para limpiar la basura de la óptica del sensorCleaning Agitator Cleaning Exterior and ToolsNettoyage du boîtier et des accessoires Nettoyage de l’agitateurLimpieza del agitador Limpieza del exterior y de las HerramientasRemoving Clogs Dégagement des obstructions Limpiar los residuos de basura en los conductosBefore Requesting Service Guide de dépannage Antes de pedir servicio Warranty Panasonic Platinum Series Vacuum Cleaner Limited WarrantyLimitations and Exclusions Garantie Garantía Page Page Page What to do When Service is Needed