GB
Water massage
•For the foot massage with warm water, the water basin (2) must be filled with water. At most, fill the water to the mark _MAX_ at the border of the water basin. The appliance will keep the temperature of the water at a constant level, but can not heat cold water.
•Connect the power plug (4) to a corresponding outlet.
•By turning the control switch (6), settings can be selected. These are as follows:
OFF | = | Appliance is off |
Massage/Heat | = | Vibration and a constant temperature (gently refreshing) |
Massage/Heat/ |
|
|
Bubble | = | Vibration, constant temperature and bubbles (stimulates blood circulation |
|
| and refreshes tired muscles) |
Bubble/Heat | = | Bubble activation and constant temperature. |
• Immerse the feet in the water basin. Sit on a chair to enjoy the massage bath. Do not use it in a standing position. If the roll elements are used, the sole of the foot is placed on the roll. If the acupuncture elements are used, the sole of the foot can also be placed on the roll massager (3).
Important:
•The massage bath should not last longer than 20 minutes. Soap and similar products should never be added to a warm water bath (Alkaline destroys the acid cover of the skin, and may result in a higher risk of athlete's foot, nail fungus, eczema etc.). Instead of soap, use neutral agents, for example Eucerin.
•The water temperature should be comfortable and pleasant. In case of pain or discomfort, interrupt the massage immediately and consult a physician.
•To finish the massage, turn the control switch to position OFF and unplug the power plug. Dry the feet well and apply cream to moisturize.
•To empty the water after use, pour the water away from the switch, along the border of the water basin. Dry massage
•Massage may also be done without water. For the dry massage, note the above points for the positions of the control switch. Instead of bubbles, there will be an air flow.
CLEANING AND MAINTENANCE
•See also the Safety advice.
•Before cleaning, always unplug the power plug and let the appliance cool down.
•Clean the foot and massage bath with damp cloth and, if necessary, some mild cleanser.
•Also clean the openings for the air supply at the bottom of the appliance. The openings must always be free from dirt, dust and other objects.
•After cleaning, dry the appliance well.
•Do not use hard objects or metal objects to clean.
•Never use scrubbing or abrasive agents or cleaning implements.
•Store the appliance in a dry place, protected from humidity, and out of the reach of children.
•Do not wind the cord around the appliance.
TECHNICAL DATA
Operating voltage | : | 230 V~ 50Hz |
Input | : | 106 W |
Short time operation | : | Max. 20 min. |
7
GB
INSTRUCTIONS ON ENVIRONMENT PROTECTION
Do not dispose of this product in the usual household garbage at the end of its life cycle; hand it over at a collection point for the recycling of electrical and electronic appliances. The symbol on the product, the instructions for use or the packing will inform about the methods for disposal.
The materials are recyclable as mentioned in its marking. By recycling, material recycling or other forms of
Please inquire at the community administration for the authorized disposal location.
GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred during production or transportation, please return the device to your dealer. In addition to statutory legal rights, the purchaser has an option to claim under the terms of the following guarantee:
For the purchased device we provide 2 years guarantee, commencing from the day of sale. During this period we will remedy all defects free of charge, which can be demonstrably attributed to material or manufacturing defects, by repair or exchange.
Defects which arise due to improper handling of the device and malfunctions due to interventions and repairs by third parties or the fitting of
0512/FS120
elta GmbH
approvedCarl-Zeiss-Str. 8
8