Philips HP4647 manual English

ENGLISH 9

-Always select a low heat setting when you start using the straightener for the first time.

-For coarse, curly or hard-to-straighten hair, selected a medium (120cC) to high heat setting (160cC).

-For fine, medium-textured or softy waved hair, select a medium (120cC) to low heat setting (80cC)

-Take extra care with pale, blonde, bleached or colour-treated hair, since it will be susceptible to damage at high temperatures.

◗The display (G) shows the selected temperature and the

remaining time of the straightening session.

-Look at the display to see the temperature you have selected.

-The bars on the display show the remaining usage time of the straightener.The total usage time is 60 minutes. Every ten minutes one of the six bars will disappear.

1Insert the plug into the wall socket.

2Press the on/off button.

The pilot light burns red to indicate that the straightener is heating up.

3Let the appliance heat up.The default heat setting is 140cC. Never leave the appliance unattended when it is plugged in.

Never put the appliance on a surface that is not heat-resistant when it is heating up and when it is hot.

4When the pilot light turns green the default temperature of

140cC has been reached.When the appliance has reached this temperature, you can adjust the temperature to your preference (fig. 2).

-Press the + button to increase the temperature or press the - button to decrease the temperature.The display tells you which temperature you have selected.The pilot light turns red to indicate that the appliance is adjusting the temperature.

-The pilot light turns green when the selected temperature has been reached.

5Comb or brush your hair so that it is disentangled and smooth (fig. 3).