www.ti.com
PCB Design and Performance
Figure 8. DAC8555EVM—Drill Drawing
2.2EVM Performance
The EVM performance test is executed using a high-density DAC bench test board, an Agilent 3458A digital multimeter and a PC running LabVIEW™ software. The EVM board is tested for linearity for all codes between 485 and 64741. The DUT is then allowed to settle for 1ms before the meter is read. This process is repeated for all codes to generate the measurements for INL and DNL.
Results of the DAC8555EVM tests are shown in Figure 9 through Figure 12.
10 | DAC8555EVM User's Guide | SLAU204 –December 2006 |
Submit Documentation Feedback
