Invacare 1106628 manual ESCALATORS? Sorry, Transferring to and from Other Seats

Page 16

GENERAL GUIDELINES

PROCEDURE 1

GENERAL GUIDELINES

 

 

Follow this procedure for moving the wheelchair between floors when an elevator is NOT available:

1.If necessary, rotate the anti-tippers so the wheels are facing up.

2.After the wheelchair has been tilted back to the balance point, one assistant (in the rear) backs the wheelchair up against the first step, while securely grasping a non-removable (non-detachable) part of the wheelchair for leverage.

3.The second assistant, with a firm hold on a non-detachable part of the framework, lifts the wheel- chair up and over the stair and steadies the wheelchair as the first assistant places one (1) foot on the next stair and repeats STEP 1.

4.The wheelchair should not be lowered until the last stair has been negotiated and the wheelchair has been rolled away from the stairway.

5.If necessary, rotate the anti-tippers so the wheels are facing down.

ESCALATORS? SORRY!

DO NOT use an escalator to move a wheelchair between floors. Serious bodily injury may occur.

TRANSFERRING TO AND FROM OTHER SEATS

WARNING

BEFORE attempting to transfer in or out of the wheelchair, every precaution should be taken to reduce the gap dis- tance. Turn both casters parallel to the object you are transferring onto. Also be certain the wheel locks are engaged to help prevent the wheels from moving.

CAUTION

When transferring, position yourself as far back as possible in the seat. This will help prevent broken screws, damaged upholstery and the possibility of the wheelchair tipping forward.

NOTE: This activity may be performed independently provided you have adequate mobility and upper body strength.

Position the wheelchair as close as possible along side the seat to which you are transferring, with the front casters pointing parallel to it. Remove or flip up the armrest. Engage wheel locks. Shift body weight into seat with transfer.

During independent transfer, little or no seat platform will be beneath you. Use a transfer board if at all possible.

Solara jr.™

16

Part No. 1106628

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Solara jr Solara jr Table of Contents Procedure 8 Wheel LOCKS/ANTI-TIPPERS Special Notes Special NotesLabel Locations Label LocationsSpecifications SpecificationsInvacare Solara JR Procedure General Guidelines Information for Healthcare PROFESSIONALS/ AssistantsGeneral Guidelines Anterior Forward TiltStability ALL Models Except Recliners Stability ALL ModelsStability Warning Operating Information Stability Recliner Models onlyGeneral Warnings Weight Training Weight LimitationStability and Balance SAFETY/HANDLING of WheelchairsCoping with Everyday Obstacles Percentage of Weight Distribution Unoccupied OccupiedMethod 1 Wheelchair with Step Tubes TippingStep Tube Stairways Tipping Curbs Method 2 Wheelchair Without Step TubeESCALATORS? Sorry Transferring to and from Other SeatsSafety Inspection Checklist Safety InspectionTroubleshooting MaintenanceProcedure 2SAFETY Inspection Maintenance Safety PrecautionsTransporting the Invacare Solara JR Transporting ProcedureTransporting INSTALLING/REMOVING Swingaway Footrest Figure Procedure Front RiggingsFront Friggings RemovingAdjusting Swingaway Footrest Height Front Riggings ProcedureHeight Adjustment Ranges Front RiggingsAdjusting Adjustable Angle FLIP-UP Footplates Figure Front Riggingsprocedure Composite Footplate DisassemblyReassembly Articulating Footplate Heel Loop ReplacementAdjusting the Elevating LEGREST/CALFPAD Assembly Figure Adjusting the LegrestAdjusting the Calfpad CalfpadUSING/ADJUSTING Dual Point Arms Figure ARMS/POSITIONING StrapsReplacing Dual Point ARM PAD Figure Procedure ARMS/POSITIONING StrapsReplacing Dual Point ARM Clothing Guards Figure Using Figure USING/INSTALLING/ADJUSTING Cantilever ArmsINSTALLING/ADJUSTING ARM PAD Replacement for Cantilever Arms Figure INSTALLING/REMOVING T-ARMS Figure Adjusting the T-ARMSInstalling T-ARMS Adjusting T-ARM Height FigureDepth Inside T-Arm Post Arm Release Lever Locked PositionOutside T- Arm Post SocketAdjusting T-ARM Transfer Assists AND/OR Side Guards Figure Adjusting T-ARM Sockets FigureHex screws and washers are removed Arm Arm Clamp Slot Arm SocketINSTALLING/REPLACING Seat Positioning Straps Figure ReplacingSide Guard Transfer Assist Socket ScrewsINSTALLING/REPLACING Chest Positioning Straps Figure Back Cane Locknut Hex Screw Chest Positioning StrapINSTALLING/REMOVING Stroller Handles Figure FOLDING/UNFOLDING Back Assembly FigureBACK/SEAT Installing Figure Detail a QUICK-RELEASE PIN InstalledRemoving Figure Quick-Release Pin Or bolt and locknut Recliners onlyLocked Position Procedure BACK/SEAT Adjusting FigureStroller Handle Thumbscrew Release Lever Using the Telescoping Back Canes Figure RAISING/LOWERINGStoring OpenINSTALLING/REPLACING the Back Upholstery Fixed Back Canes FigureREMOVING/INSTALLING the Spreader BAR Figure Installing and Removing a Seating SystemClamp Spreader Bar Set Screw Back Canes Rear Installing the Seat Cushion FigureWheelchair Front REMOVING/INSTALLING Rear Wheels Figure WHEELS/FORKS ProcedureWHEELS/FORKS Quick Release AxleAdjusting the Quick Release Axle Figure SEAT-TO-FLOOR Height AdjustmentProcedure WHEELS/FORKS Axle Mounting Plate Locking PinsAdjusting Forks Figure Fork Dust Cover Caster HeadtubeAdjusting Wheel Locks Figures 1 Procedure Wheel LOCKS/ANTI-TIPPERSWheel TIPPERS-LOCKS/ANTI 16-INCH Rear Wheels 18 24-INCH Rear WheelsFoot Activated Wheel Locks 12-INCH Wheels only Figure Using the Wheel LocksWheel LOCKS/ANTI-TIPPERS INSTALLING/ADJUSTING ANTI-TIPPERS Figure Adjusting2 to 2-inch ClearanceAnti-tipper Ground/FloorEngaging Tilt in SPACE/RECLINER Operation TILT/RECLINE ProcedureTILT/RECLINE Procedure TILT/RECLINE Engaging TILT-IN-SPACE FigureTILT-IN-SPACE Tilt SlideTILT/RECLINE Procedure Recliner Operation Figure Gas CylinderAdjusting Tilt Trigger Release Cables Figure Cable Locking Nut Trigger Release Lever Cable Adjusting NutAdjusting Upper Tilt Locking Collar Figure Bearing HousingPositioning Tilt Locking Collars Magnetic protractor reads desired angle of tiltReplacing the Back Upholstery Replacing the Headrest UpholsteryHeadrest Upholstery Extension Back Cane Back UpholsteryAdjusting the Back Height Recliner Models only Figure Inch Seat Cushion PositionContracture Assembly Angle Adjustment Figure Procedure Contracture FootplateFootplatecontracture Mounting ScrewUsing the Optional Quick Release PIN Figure Angle Adjustment of the Contracture Footplate FigureContracture Footplate Depth Adjustment Figure ContractureContracture Footplate Height Adjustment Figure Replacing the Contracture Footplate Heel Loop FigureMounting Hole ContractureSolara jr Solara jr Warranty Limited WarrantyWarranty One Invacare Way

1106628 specifications

The Invacare 1106628 is a robust and innovative mobility solution designed to enhance the quality of life for individuals with limited mobility. This power wheelchair combines advanced technology and user-friendly features, making it an excellent choice for both indoor and outdoor use.

One of the standout characteristics of the Invacare 1106628 is its versatile seating system, which provides optimal comfort and support. The seat is designed to accommodate various body types and can be adjusted to ensure perfect alignment and positioning. Additionally, the chair includes a contoured backrest that offers lumbar support, promoting good posture during extended use.

Technology plays a significant role in the design of the Invacare 1106628. The wheelchair is equipped with a powerful motor and a durable battery system, allowing for a long driving range and reliable performance. With a top speed that makes navigating urban settings easy, users can enjoy both independence and accessibility. The advanced joystick control allows for smooth and precise maneuvering, enabling efficient navigation through tight spaces.

The wheelchair also boasts a sturdy construction, ensuring it can withstand the rigors of daily use. The frame is made from high-quality materials, providing durability while remaining lightweight enough for easy transport. Its compact design enhances maneuverability, making it suitable for use in various environments, from bustling shopping malls to narrow hallways in homes.

Safety features are paramount in the design of the Invacare 1106628. The wheelchair comes with anti-tip wheels, ensuring stability during movement, particularly when climbing slopes or navigating uneven terrain. The durable tires are designed for excellent traction, further enhancing safety and control in various outdoor settings.

In terms of additional features, the Invacare 1106628 includes customizable options such as adjustable armrests, footrests, and various accessory attachments. This flexibility allows users to tailor the wheelchair to their specific needs, enhancing overall comfort and usability.

In conclusion, the Invacare 1106628 is a well-engineered power wheelchair that incorporates advanced technology, safety features, and customizable options. It is designed to provide individuals with mobility challenges the independence and support they need, making it a valuable asset for users seeking to improve their quality of life. Whether navigating through their home or enjoying the great outdoors, the Invacare 1106628 delivers on performance, comfort, and durability.
Top Page Image Contents