Invacare 1106628 manual Procedure BACK/SEAT Adjusting Figure, Locked Position

Page 36

BACK/SEAT

PROCEDURE 6

BACK/SEAT

 

 

ADJUSTING (FIGURE 4)

1.Flip both release levers to the unlocked position.

2.Adjust stroller handle to desired angle.

3.Flip both release levers to the locked position.

4.Push down on stroller handle to ensure release levers hold the desired position of the stroller handle.

5.If release levers do not hold the position, tighten the release lever by performing the following:

A.Flip release lever to the unlocked position.

B.Rotate thumbscrew CLOCKWISE one (1) revolution.

NOTE: When tightening the release lever, the release lever must be able to close completely into the locked position. Otherwise, the release levers will not hold the desired angle.

C. Flip release levers to the locked position.

NOTE: If the release levers do not close completely into the locked position, rotate the thumb- screw on each release lever COUNTERCLOCKWISE 1/2 revolution.

D.Repeat STEPS A-C for opposite release lever.

E.Push down on stroller handle to ensure release levers hold the desired position of the stroller handle.

F.Repeat STEPS A-E until release levers hold the position.

Stroller Handle

Thumbscrew

Release

Lever

LOCKED

POSITION

FIGURE 4 - ADJUSTING THE ADJUSTABLE ANGLE STROLLER HANDLES

Solara jr.™

36

Part No. 1106628

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Solara jr Solara jr Table of Contents Procedure 8 Wheel LOCKS/ANTI-TIPPERS Special Notes Special NotesLabel Locations Label LocationsSpecifications SpecificationsInvacare Solara JR Procedure General Guidelines Information for Healthcare PROFESSIONALS/ AssistantsGeneral Guidelines Anterior Forward TiltStability ALL Models Stability ALL Models Except ReclinersStability Warning Stability Recliner Models only Operating InformationGeneral Warnings Weight Training Weight LimitationSAFETY/HANDLING of Wheelchairs Stability and BalanceCoping with Everyday Obstacles Percentage of Weight Distribution Unoccupied OccupiedTipping Method 1 Wheelchair with Step TubesStep Tube Stairways Tipping Curbs Method 2 Wheelchair Without Step TubeESCALATORS? Sorry Transferring to and from Other SeatsSafety Inspection Checklist Safety InspectionTroubleshooting MaintenanceProcedure 2SAFETY Inspection Maintenance Safety PrecautionsTransporting Procedure Transporting the Invacare Solara JRTransporting INSTALLING/REMOVING Swingaway Footrest Figure Procedure Front RiggingsFront Friggings RemovingAdjusting Swingaway Footrest Height Front Riggings ProcedureHeight Adjustment Ranges Front RiggingsAdjusting Adjustable Angle FLIP-UP Footplates Figure Front Riggingsprocedure Composite Footplate DisassemblyReassembly Articulating Footplate Heel Loop ReplacementAdjusting the Elevating LEGREST/CALFPAD Assembly Figure Adjusting the LegrestAdjusting the Calfpad CalfpadUSING/ADJUSTING Dual Point Arms Figure ARMS/POSITIONING StrapsProcedure ARMS/POSITIONING Straps Replacing Dual Point ARM PAD FigureReplacing Dual Point ARM Clothing Guards Figure USING/INSTALLING/ADJUSTING Cantilever Arms Using FigureINSTALLING/ADJUSTING ARM PAD Replacement for Cantilever Arms Figure INSTALLING/REMOVING T-ARMS Figure Adjusting the T-ARMSInstalling T-ARMS Adjusting T-ARM Height FigureDepth Inside T-Arm Post Arm Release Lever Locked PositionOutside T- Arm Post SocketAdjusting T-ARM Transfer Assists AND/OR Side Guards Figure Adjusting T-ARM Sockets FigureHex screws and washers are removed Arm Arm Clamp Slot Arm SocketINSTALLING/REPLACING Seat Positioning Straps Figure ReplacingSide Guard Transfer Assist Socket ScrewsINSTALLING/REPLACING Chest Positioning Straps Figure Back Cane Locknut Hex Screw Chest Positioning StrapFOLDING/UNFOLDING Back Assembly Figure INSTALLING/REMOVING Stroller Handles FigureBACK/SEAT Installing Figure Detail a QUICK-RELEASE PIN InstalledRemoving Figure Quick-Release Pin Or bolt and locknut Recliners onlyProcedure BACK/SEAT Adjusting Figure Locked PositionStroller Handle Thumbscrew Release Lever Using the Telescoping Back Canes Figure RAISING/LOWERINGStoring OpenINSTALLING/REPLACING the Back Upholstery Fixed Back Canes FigureInstalling and Removing a Seating System REMOVING/INSTALLING the Spreader BAR FigureClamp Spreader Bar Set Screw Back Canes Installing the Seat Cushion Figure RearWheelchair Front REMOVING/INSTALLING Rear Wheels Figure WHEELS/FORKS ProcedureWHEELS/FORKS Quick Release AxleAdjusting the Quick Release Axle Figure SEAT-TO-FLOOR Height AdjustmentProcedure WHEELS/FORKS Axle Mounting Plate Locking PinsAdjusting Forks Figure Fork Dust Cover Caster HeadtubeAdjusting Wheel Locks Figures 1 Procedure Wheel LOCKS/ANTI-TIPPERSWheel TIPPERS-LOCKS/ANTI 16-INCH Rear Wheels 18 24-INCH Rear WheelsUsing the Wheel Locks Foot Activated Wheel Locks 12-INCH Wheels only FigureWheel LOCKS/ANTI-TIPPERS INSTALLING/ADJUSTING ANTI-TIPPERS Figure Adjusting2 to 2-inch ClearanceAnti-tipper Ground/FloorTILT/RECLINE Procedure Engaging Tilt in SPACE/RECLINER OperationTILT/RECLINE Procedure TILT/RECLINE Engaging TILT-IN-SPACE FigureTILT-IN-SPACE Tilt SlideTILT/RECLINE Procedure Recliner Operation Figure Gas CylinderAdjusting Tilt Trigger Release Cables Figure Cable Locking Nut Trigger Release Lever Cable Adjusting NutAdjusting Upper Tilt Locking Collar Figure Bearing HousingPositioning Tilt Locking Collars Magnetic protractor reads desired angle of tiltReplacing the Back Upholstery Replacing the Headrest UpholsteryHeadrest Upholstery Extension Back Cane Back UpholsteryAdjusting the Back Height Recliner Models only Figure Inch Seat Cushion PositionContracture Assembly Angle Adjustment Figure Procedure Contracture FootplateFootplatecontracture Mounting ScrewUsing the Optional Quick Release PIN Figure Angle Adjustment of the Contracture Footplate FigureContracture Footplate Depth Adjustment Figure ContractureContracture Footplate Height Adjustment Figure Replacing the Contracture Footplate Heel Loop FigureMounting Hole ContractureSolara jr Solara jr Limited Warranty WarrantyWarranty One Invacare Way

1106628 specifications

The Invacare 1106628 is a robust and innovative mobility solution designed to enhance the quality of life for individuals with limited mobility. This power wheelchair combines advanced technology and user-friendly features, making it an excellent choice for both indoor and outdoor use.

One of the standout characteristics of the Invacare 1106628 is its versatile seating system, which provides optimal comfort and support. The seat is designed to accommodate various body types and can be adjusted to ensure perfect alignment and positioning. Additionally, the chair includes a contoured backrest that offers lumbar support, promoting good posture during extended use.

Technology plays a significant role in the design of the Invacare 1106628. The wheelchair is equipped with a powerful motor and a durable battery system, allowing for a long driving range and reliable performance. With a top speed that makes navigating urban settings easy, users can enjoy both independence and accessibility. The advanced joystick control allows for smooth and precise maneuvering, enabling efficient navigation through tight spaces.

The wheelchair also boasts a sturdy construction, ensuring it can withstand the rigors of daily use. The frame is made from high-quality materials, providing durability while remaining lightweight enough for easy transport. Its compact design enhances maneuverability, making it suitable for use in various environments, from bustling shopping malls to narrow hallways in homes.

Safety features are paramount in the design of the Invacare 1106628. The wheelchair comes with anti-tip wheels, ensuring stability during movement, particularly when climbing slopes or navigating uneven terrain. The durable tires are designed for excellent traction, further enhancing safety and control in various outdoor settings.

In terms of additional features, the Invacare 1106628 includes customizable options such as adjustable armrests, footrests, and various accessory attachments. This flexibility allows users to tailor the wheelchair to their specific needs, enhancing overall comfort and usability.

In conclusion, the Invacare 1106628 is a well-engineered power wheelchair that incorporates advanced technology, safety features, and customizable options. It is designed to provide individuals with mobility challenges the independence and support they need, making it a valuable asset for users seeking to improve their quality of life. Whether navigating through their home or enjoying the great outdoors, the Invacare 1106628 delivers on performance, comfort, and durability.
Top Page Image Contents