EDGE 540. | Instruction Manual. |
|
|
C/A glue.
INSTALLING THE BATTERY.
Battery.
Repeat the procedure for the other aileron servo.
ENGINE MOUNT.
See pictures below:
4mm X 20mm.
10
FUEL TANK.
INSTALLING THE STOPPER ASSEMBLY.
1)Using a modeling knife, carefully cut off the rear portion of one of the 3 nylon tubes leaving 1/2” protruding from the rear of the stopper. This will be the fuel pick up tube.
2)Using a modeling knife, cut one length of silicon fuel line. Connect one end of the line to the weighted fuel pick up and the other end to the nylon pick up tube.
3)Carefully bend the second nylon tube up at a 45º angle. This tube is the vent tube.