EDGE Tech Edge 540 specifications

Page 1

EDGE 540

Hand-made Almost Ready to Fly R/C Model Aircraft

ASSEMBLY MANUAL

Specifications

Wingspan----------------------------------------

68.2 in-------------------------

173.2cm.

Wing area---------------------------------------

753sq.in--------------------

48.6 sq.dm.

Approximate flying weight--------------------

8.4-8.8lbs---------------------

3.8-4kg.

Length--------------------------------------------

60.6 in----------------------------

154cm.

Recommended engine size-----------------

.61- .91 cu.in----------------

2-stroke.

 

.91-1.00 cu.in----------------

4-stroke.

Radio System required 4 channel

with 6 digital servos.

 

Flying skill level Intermediate/advanced.

Kit features.

Ready-made—minimal assembly & finishing required.

Ready-covered covering.

Photo-illustrated step-by-step Assembly Manual.

Made in Vietnam.

Image 1
Contents Edge Introduction Parts ListingAdditional Items Required Tools & Supplies NeededEdge Hinging the Ailerons Hinging the Elevators Hinging the Rudder Installing the Aileron Servos Aileron Linkage Servo arm Engine Mount Installing the BatteryFuel Tank Mounting the Engine Wheel and Wheel Pants Follow diagram below for wheel pant installation Cowling Installing the Main Landing GearInstalling the Spinner Horizontal Stabilizer Elevator Rudder Servo InstallationVertical Stabilizer Installation Control Horn Installation ELEVATOR-RUDDER Pushrod Installation Mounting the Tail Wheel Bracket Installing Tail Strut SystemMounting the Control Clasp Installing the Fuselage Servo Installing the SwitchThrottle Servo Installation Installing the Receiver Balancing Attachment WING-FUSELAGEControl Throws Preflight Check Flight PreparationEdge Edge