EDGE Tech Edge 540 specifications

Page 3

EDGE 540.

Instruction Manual.

NOTE: To avoid scratching your new aero- plane we suggest that you cover your workbench with an old towel. Keep a couple of jars or bowls handy to hold the small parts after you open the bags.

Please trial fit all parts. Make sure you have the correct parts and that they fit and are aligned properly before gluing! This will ensure proper as- sembly as the EDGE 540 is made from natural materials and minor ad- justments may have to be made.

The paint and plastic parts used in this kit are fuel proof. However, they are not tolerant of many harsh chemi- cals including the following: paint thinner, cyano-acrylate glue accel- erator, cyanoacrylate glue de-bonder and acetone. Do not let these chemi- cals come in contact with the colours on the covering and the plastic parts.

3

Image 3
Contents Edge Tools & Supplies Needed Parts ListingIntroduction Additional Items RequiredEdge Hinging the Ailerons Hinging the Elevators Hinging the Rudder Installing the Aileron Servos Aileron Linkage Servo arm Installing the Battery Engine MountFuel Tank Mounting the Engine Wheel and Wheel Pants Follow diagram below for wheel pant installation Cowling Installing the Main Landing GearInstalling the Spinner Horizontal Stabilizer Elevator Rudder Servo InstallationVertical Stabilizer Installation Control Horn Installation ELEVATOR-RUDDER Pushrod Installation Installing Tail Strut System Mounting the Tail Wheel BracketMounting the Control Clasp Installing the Switch Installing the Fuselage ServoThrottle Servo Installation Installing the Receiver Attachment WING-FUSELAGE BalancingControl Throws Preflight Check Flight PreparationEdge Edge