Troubleshooting
Problem | Easy Solution | |
|
|
|
EO is displayed on | a. | Check that lid is closed properly. |
LED Screen | b. Check the pressure release valve is in the | |
| ||
|
| correct position. |
| c. | Make sure the silicone rubber gasket is attached |
|
| properly to the gasket holder and is securely in place |
|
| on the lid. |
|
|
|
E1 is displayed on | • | Unplug unit and allow to sit for 20 minutes. If no |
LED Screen |
| change, Please call Breville Customer Service. |
|
|
|
E2 is displayed on | • | Ensure Cooking bowl is properly positioned inside |
LED Screen |
| base. The cooking bowl must be in direct contact |
|
| with the heating plate. Make sure there are no |
|
| unwanted materials on the heating plate. |
|
|
|
E3 is displayed on | • | Ensure lid is off the appliance or placed on top to |
LED Screen |
| rest in an offset position when you are using the |
|
| SAUTÉ/SEAR setting. |
|
|
|
The appliance automatically | • | Add more water to cooking bowl and restart the |
switches to Keep Warm |
| cooking cycle. |
without going through a |
|
|
complete cooking cycle |
|
|
|
|
|
Air is escaping from the rim | a. | Install sealing gasket correctly. |
of the lid | b. Clean sealing gasket. | |
| ||
| c. | Replace sealing gasket. |
| d. | Lock lid again. |
|
|
|
Steam is released from the | a. | Clean sealing gasket. |
float valve | b. Replace sealing gasket. | |
| ||
| c. | Change silicone rubber gasket every |
|
|
|
The float can not rise in | a. | Place Pressure release valve in the correct position. |
PRESSURE COOK setting | b. Place more food and water in the cooking bowl. | |
| ||
| c. | Call Breville Customer Service. |
|
|
|
Lid is hard to open or cannot | a. | Check if the pressure indicator locking pin is in the |
be opened |
| upright position. If it isn't, push down with aid of a |
|
| pencil or like item, jiggle the lid and disengage. |
|
| This will allow the air to escape and the lid should |
|
| open. |
|
|
|
65