Leica DM750 Leica Standard Viewing Tube separated eyepieces, Insert the eyepieces into the tubes

Page 25

Leica Standard Viewing Tube – separated eyepieces

1. Insert the eyepieces into the tubes.

Standard viewing tubes; tubes do not include eyepieces yet

The standard viewing tube has a rota- table dovetail. Therefore, you can now rotate the standard viewing tube freely in any

orientation.

2.Secure the eyepieces in the tubes by tighte- ning the silver screws at the bottom of the tubes using a standard Phillips screwdriver (not included in the delivery package).

The eyepieces will still rotate, but they will be captive in the eyetubes.

Leica DM750	Manual	25

Image 25

Contents Leica DM750 Manual Manufacturer information Responsible for contentsPublished in November 2010 by Chapter overview Contents Safety regulations Safety concept Important information Light bulbsProvide clarity Explanatory notesImportant Notes Safety instructionsDescription Contact addressIntended Purpose of the Microscope Instructions on use So in the instructions For safety and potential hazardsPlace of use FungusScope of this manual Rights to any warranty claimsTransport DisposalHealth risks Health risks and dangers of useDual or detachable eyecups LED Klasse 1 /LED 1 Laser ProductInformation for the person responsible for the instrument Information for the person responsible for the instrumentCleaning glass surfaces Cleaning coated parts and plastic partsϘϘ Remove tough dirt using alcohol or petro- leum ether Care instructionsAccessories Accessories, maintenance and repairMaintenance Repairs and service workElectrical data and ambient conditions Fuse ReplacementElectrical data EnvironmentLeica DM750 Result if used improperly IntroductionUnpacking Ready Substage Illumination Adjustable Condenser CenteringLeica DM750 is available with two Types of Substage Illumination. Identify ToolTools used Attaching the viewing TubesϘϘ Allen key Leica EZ viewing tube with integrated eyepieces Leica EZ Viewing Tube integrated eyepiecesEyepieces Continue with the Eyecups section on Tightening the captive thumbscrew againInsert the eyepieces into the tubes Leica Standard Viewing Tube separated eyepiecesOrientation Eyecups Installing Objectives section onOrder to help block out ambient room light Installing Objectives Installing ObjectivesObjective nosepiece Ser needs to be installed Installing the Substage CondenserSubstage Condenser Thus roughly centered Set Setting the Illumination Intensity Power CordTurning on the microscope Work SurfaceDelivery package or, for a Leica DM750 Complete Condenser CenteringWith Koehler illumination, tighten Knurled screws Using the Condenser Using the CondenserSlide grips hold the slide in place Prepare to View a Specimen SlideFocusing Adjust the eyetubes Viewing Tube AdjustmentStandard Viewing Tube with One or Two Focusing Eyepieces Leica EZ Viewing TubeOn and your adjustments will be minimal Condenser focusing knob Koehler ConfigurationKoehler Configuration Oil Immersion Technique Oil Immersion Technique Changing the status of the time delay shutoff Time Delay ShutoffOr Disabled and you will not see any blinking No changes in the intensity controlLeica DM750 Manual Ready! Set! Go Care of the Microscope Instructions for cleaning General maintenanceStorage and handling Illumination Mechanical MaintenanceTroubleshooting Make sure that a DF objective is being used TroubleshootingPhase contrast Dimensions Leica DM750 Manual Leica DM750 Manual Leica DM750 Manual