Leica DM750 Light bulbs, Important information, Provide clarity, Explanatory notes, Consumables

Page 7

Symbols used in this instruction manual

Warning of a danger

This symbol indicates especially impor- tant information that is mandatory to

read and observe.

Failure to comply can cause the following: ϘϘ Hazards to personnel

ϘϘ Functional disturbances or damaged inst- ruments

Warning of hazardous electrical voltage This symbol indicates especially impor- tant information that is mandatory to

read and observe.

Failure to comply can cause the following: ϘϘ Hazards to personnel

ϘϘ Functional disturbances or damaged instruments

Danger due to hot surface.

This symbol warns against touching accessible hot surfaces, e.g. those of

light bulbs.

Important information

This symbol indicates additional infor- mation or explanations that intend to

provide clarity.

Explanatory notes

ϐϐ This symbol within the text points to additi- onal information and explanations.

Instructions for disposing of the inst- rument, accessory components, and

consumables.

Leica DM750

Manual

7

 

 

 

Image 7
Contents Leica DM750 Manual Manufacturer information Responsible for contentsPublished in November 2010 by Chapter overview Contents Safety regulations Safety concept Explanatory notes Light bulbsImportant information Provide clarityContact address Safety instructionsImportant Notes DescriptionIntended Purpose of the Microscope Fungus So in the instructions For safety and potential hazardsInstructions on use Place of useDisposal Rights to any warranty claimsScope of this manual TransportLED Klasse 1 /LED 1 Laser Product Health risks and dangers of useHealth risks Dual or detachable eyecupsInformation for the person responsible for the instrument Information for the person responsible for the instrumentCare instructions Cleaning coated parts and plastic partsCleaning glass surfaces ϘϘ Remove tough dirt using alcohol or petro- leum etherRepairs and service work Accessories, maintenance and repairAccessories MaintenanceEnvironment Fuse ReplacementElectrical data and ambient conditions Electrical dataLeica DM750 Result if used improperly IntroductionUnpacking Ready Types of Substage Illumination. Identify Tool Adjustable Condenser CenteringSubstage Illumination Leica DM750 is available with twoTools used Attaching the viewing TubesϘϘ Allen key Leica EZ viewing tube with integrated eyepieces Leica EZ Viewing Tube integrated eyepiecesEyepieces Continue with the Eyecups section on Tightening the captive thumbscrew againInsert the eyepieces into the tubes Leica Standard Viewing Tube separated eyepiecesOrientation Eyecups Installing Objectives section onOrder to help block out ambient room light Installing Objectives Installing ObjectivesObjective nosepiece Ser needs to be installed Installing the Substage CondenserSubstage Condenser Thus roughly centered Set Work Surface Power CordSetting the Illumination Intensity Turning on the microscopeDelivery package or, for a Leica DM750 Complete Condenser CenteringWith Koehler illumination, tighten Knurled screws Using the Condenser Using the CondenserSlide grips hold the slide in place Prepare to View a Specimen SlideFocusing Leica EZ Viewing Tube Viewing Tube AdjustmentAdjust the eyetubes Standard Viewing Tube with One or Two Focusing EyepiecesOn and your adjustments will be minimal Condenser focusing knob Koehler ConfigurationKoehler Configuration Oil Immersion Technique Oil Immersion Technique No changes in the intensity control Time Delay ShutoffChanging the status of the time delay shutoff Or Disabled and you will not see any blinkingLeica DM750 Manual Ready! Set! Go Care of the Microscope Instructions for cleaning General maintenanceStorage and handling Illumination Mechanical MaintenanceTroubleshooting Make sure that a DF objective is being used TroubleshootingPhase contrast Dimensions Leica DM750 Manual Leica DM750 Manual Leica DM750 Manual