Leica DM750 manual Intended Purpose of the Microscope

Page 9

Intended Purpose of the Microscope

 

The Leica DM750 microscope, for which

Caution! The manufacturer assumes

Caution! This (IVD) instrument is not

 

this instruction manual has been writ-

no liability for any noncompliant use

intended for use in a patient envi-

ten, is intended for biological routine and

or use outside of the specifications from Leica

ronment as defined by DIN VDE 0100-710.

research applications. This includes exami-

Microsystems CMS GmbH as well as any risks

It is also not intended to be combined with

ning specimens taken from the human body

that may arise from such use. In such cases, the

medical devices as defined by EN 60601-1. If a

for the purpose of gaining information about

Declaration of Conformity shall be invalid.

microscope is electrically connected to a medi-

physiological or

pathological

conditions

 

cal instrument in accordance with EN 60601-1,

or inborn anomalies, or testing for safety

 

the requirements defined in EN 60601-1-1 shall

and

compatibility

for potential

recipients,

 

apply. Not suitable for examining potentially

or

for monitoring

therapeutic

measures.

 

infectious specimens.

The above-named microscope complies with the Council Directive 98/79/EEC concerning in vitro diagnostics.

Caution! The Leica DM750 microscope is not intended for use with biologically

hazardous materials.

Leica DM750

Manual

9

 

 

 

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Leica DM750 Manual Responsible for contents Manufacturer informationPublished in November 2010 by Chapter overview Contents Safety regulations Safety concept Important information Light bulbsProvide clarity Explanatory notesImportant Notes Safety instructionsDescription Contact addressIntended Purpose of the Microscope Instructions on use So in the instructions For safety and potential hazardsPlace of use FungusScope of this manual Rights to any warranty claimsTransport DisposalHealth risks Health risks and dangers of useDual or detachable eyecups LED Klasse 1 /LED 1 Laser ProductInformation for the person responsible for the instrument Information for the person responsible for the instrumentCleaning glass surfaces Cleaning coated parts and plastic partsϘϘ Remove tough dirt using alcohol or petro- leum ether Care instructionsAccessories Accessories, maintenance and repairMaintenance Repairs and service workElectrical data and ambient conditions Fuse ReplacementElectrical data EnvironmentLeica DM750 Result if used improperly IntroductionUnpacking Ready Substage Illumination Adjustable Condenser CenteringLeica DM750 is available with two Types of Substage Illumination. Identify ToolAttaching the viewing Tubes Tools usedϘϘ Allen key Leica EZ viewing tube with integrated eyepieces Leica EZ Viewing Tube integrated eyepiecesEyepieces Continue with the Eyecups section on Tightening the captive thumbscrew againLeica Standard Viewing Tube separated eyepieces Insert the eyepieces into the tubesOrientation Installing Objectives section on EyecupsOrder to help block out ambient room light Installing Objectives Installing ObjectivesObjective nosepiece Installing the Substage Condenser Ser needs to be installedSubstage Condenser Thus roughly centered Set Setting the Illumination Intensity Power CordTurning on the microscope Work SurfaceComplete Condenser Centering Delivery package or, for a Leica DM750With Koehler illumination, tighten Knurled screws Using the Condenser Using the CondenserSlide grips hold the slide in place Prepare to View a Specimen SlideFocusing Adjust the eyetubes Viewing Tube AdjustmentStandard Viewing Tube with One or Two Focusing Eyepieces Leica EZ Viewing TubeOn and your adjustments will be minimal Condenser focusing knob Koehler ConfigurationKoehler Configuration Oil Immersion Technique Oil Immersion Technique Changing the status of the time delay shutoff Time Delay ShutoffOr Disabled and you will not see any blinking No changes in the intensity controlLeica DM750 Manual Ready! Set! Go Care of the Microscope General maintenance Instructions for cleaningStorage and handling Illumination Mechanical MaintenanceTroubleshooting Make sure that a DF objective is being used TroubleshootingPhase contrast Dimensions Leica DM750 Manual Leica DM750 Manual Leica DM750 Manual
Top Page Image Contents