Grandstream Networks GXP1450 Softkeys in Call Screen, Dial, Hold, AnswerCall, RejectCall, EndCall

SOFTKEYS in Call

Screen

Note:

If XML application is used for GXP2120/GXP2110/GXP2100, the softkey for XML application will show up in the default idle screen as configured.

The softkeys are context sensitive and will change depending on the call status of the phone.

•Redial

Redials the last dialed number after off hook when there is existed call log.

•Dial

Dials the call out after off hook and entering the number.

•Hold

Puts the current active call on hold.

•AnswerCall

Answers the incoming call when the phone is ringing.

•RejectCall

Rejects the incoming call when the phone is ringing.

•EndCall

Ends the active call.

•Transfer

Transfer softkey will show up after pressing TRAN button and entering transfer target number. Press Transfer softkey to do blind transfer.

•Split

In auto-attended transfer mode, after establishing the second call, press Split to quit transfer and go back to normal talking status.

•ConfCall

Conferences the active calls.

•ReConf

Re-establish the conference among the calls on hold.

FIRMWARE VERSION 1.0.4.23 GXP2120/GXP2110/GXP2100/GXP1450 USER MANUAL Page 16 of 69