Enable STAR key Keypad locking
Password to lock/unlock
Offhook timeout
China Telecom Mode
Do Not Escape # as %23 in
SIP URI
Disable Telnet
Display Language
Download Device
Configuration
NETWORK options will not display for users to access in keypad menu.
If set to "Yes", the keypad can be locked by pressing and holding the STAR * key for about 4 seconds. A lock icon will show indicating the keypad is locked. The default setting is "Yes".
Note:
When the keypad is locked, users would need press and hold the STAR
*key for about 4 seconds again and then enter the password to unlock it.
Configures the password to lock/unlock the keypad. The password field allows number with up to 32 characters.
If configured, when the phone is on hook, it will go off hook after the timeout (in seconds). The default value is 30 seconds.
Enables/Disables China Telecom Mode to use China Telecom special features on the phone.
Specifies whether to replace # by %23 or not for some special situations. The default setting is "No".
Disables Telnet access. The default setting is "No".
Selects display language on the phone.
Click to download the device configuration file in .txt format.
NAT SETTINGS
If the devices are kept within a private network behind a firewall, we recommend using STUN Server. The following settings are useful in the STUN Server scenario:
•STUN Server (under Advanced Settings page)
Enter a STUN Server IP (or FQDN) that you may have, or look up a free public STUN Server on the internet and enter it on this field. If using Public IP, keep this field blank.
•Use Random Ports (under Advanced Settings page)
This setting depends on your network settings. When set to "Yes", it will force random generation of both the local SIP and RTP ports. This is usually necessary when multiple GXPs are behind the same NAT. If using a Public IP address, set this parameter to "No".
FIRMWARE VERSION 1.0.4.23 | GXP2120/GXP2110/GXP2100/GXP1450 USER MANUAL | Page 60 of 69 |