Grandstream Networks GXP1450, GXP2110 Answering Phone Calls, Receiving Calls, Do not Disturb

For example:

•192.168.0.2 calling 192.168.0.3 -- dial #3 followed by # or “SEND”;

•192.168.0.2 calling 192.168.0.23 -- dial #23 followed by # “SEND”;

•192.168.0.2 calling 192.168.0.123 -- dial #123 followed by # “SEND”;

•192.168.0.2: dial #3 and #03 and #003 results in the same call -- call 192.168.0.3.

Note:

•The # will represent colon ":" in direct IP call rather than SEND key as in normal phone call;

•If you have a SIP server configured, direct IP call still works. If you are using STUN, direct IP call will also use STUN;

•Configure the "User Random Port" to "No" when completing direct IP calls.

ANSWERING PHONE CALLS

RECEIVING CALLS

•Single incoming call. Phone rings with selected ring tone. The corresponding LINE key will flash in red. Answer call by taking handset off hook, or using Speaker/Headset, or pressing the flashing LINE key;

•Multiple incoming calls. When another call comes in while having an active call, the phone will produce a Call Waiting tone (stutter tone). The other LINE key will flash in red. Answer the incoming call by pressing the flashing LINE key. The current active call will be put on hold automatically.

DO NOT DISTURB

Do Not Disturb can be enabled/disabled by pressing the DND button on the phone when the phone is in idle (For GXP2120/GXP2110 only. On GXP1450, press the MUTE button). Or users could set it from phone's Menu following the steps below:

•Press the Menu button and select "Preference" using navigation keys;

•Press Menu button again to get into Preference options;

•Select "Do Not Disturb" and press Menu button;

•Use arrow keys to select and press Menu button to enable or disable "Do Not Disturb" feature.

When Do Not Disturb feature is turned on, the DND icon will appear on the right side of the LCD. The incoming call will not be accepted or the call will directly go into voicemail.

FIRMWARE VERSION 1.0.4.23 GXP2120/GXP2110/GXP2100/GXP1450 USER MANUAL Page 25 of 69