Grandstream Networks GXP2110, GXP1450, GXP2100 user manual Acs Url

STUN Server

Firmware Upgrade and Provisioning

XML Config File Password

HTTP/HTTPS User Name HTTP/HTTPS Password

Upgrade Via

Firmware Server Path

Config Server Path

Firmware File Prefix

Firmware File Postfix

Config File Prefix

Config File Postfix

Allow DHCP Option 43 and Option 66 Override Server

Automatic Upgrade

Authenticate Conf File

Enable TR-069

ACS URL

The IP address or Domain name of the STUN server. STUN resolution results are displayed in the STATUS page of the Web GUI. Only non-symmetric NAT routers work with STUN.

Specifies how firmware upgrading and provisioning request to be sent: Always Check for New Firmware, Check New Firmware only when F/W pre/suffix changes, Always Skip the Firmware Check.

The password for encrypting the XML configuration file using OpenSSL. This is required for the phone to decrypt the encrypted XML configuration file.

The user name for the HTTP/HTTPS server.

The password for the HTTP/HTTPS server.

Allows users to choose the firmware upgrade method: TFTP, HTTP or

HTTPS.

Defines the server path for the firmware server. It could be different from the configuration server for provisioning.

Defines the server path for provisioning. It could be different from the firmware server for upgrading.

Enables your ITSP to lock firmware updates. If configured, only the firmware with the matching encrypted prefix will be downloaded and flashed into the phone.

Enables your ITSP to lock firmware updates. If configured, only the firmware with the matching encrypted postfix will be downloaded and flashed into the phone.

Enables your ITSP to lock configuration updates. If configured, only the configuration file with the matching encrypted prefix will be downloaded and flashed into the phone.

Enables your ITSP to lock configuration updates. If configured, only the configuration file with the matching encrypted postfix will be downloaded and flashed into the phone.

If DHCP option 66 is enabled on the LAN side, the TFTP server can be redirected. The default setting is "Yes".

Enables automatic upgrade and provisioning. The default setting is "No".

Authenticates configuration file before acceptance. The default setting is "No".

Enables TR-069. The default setting is "No".

URL for TR-069 Auto Configuration Servers (ACS).

FIRMWARE VERSION 1.0.4.23 GXP2120/GXP2110/GXP2100/GXP1450 USER MANUAL Page 54 of 69