Grandstream Networks GXP2110, GXP1450, GXP2100 user manual M4.1.0,M11.1.0

Enable Weather Update

City Code

Update Interval

Degree Unit

Enable Stock Update

Stock Code

Enable Currency Update

Currency Code

LCD Backlight Brightness LCD Contrast

U.S central time. If it is positive (+) if the local time zone is west of the Prime Meridian (A.K.A: International or Greenwich Meridian) and negative (-) if it is east.

M4.1.0,M11.1.0

The 1st number indicates Month: 1,2,3.., 12 (for Jan, Feb, .., Dec)

The 2nd number indicates the nth iteration of the weekday: (1st Sunday, 3rd Tuesday…)

The 3rd number indicates weekday: 0,1,2,..,6( for Sun, Mon, Tues, ... ,Sat)

Therefore, this example is the DST which starts from the First Sunday of April to the 1st Sunday of November.

Configures to enable or disable weather update on the phone. The default setting is "Yes". If set to "No", the weather information screen will not show.

Configures weather city code for the phone to look up the weather information. The default setting is "Automatic" and the weather information will be obtained based on the IP location of the phone if available. Otherwise, specify the self-defined city code. For example, USCA0638 is the city code for Los Angeles, CA, United States.

Specifies the weather update interval (in minutes). The default value is 15 minutes.

Specifies the degree unit for the weather information to display on the phone.

Configures to enable or disable stock update on the phone (Not applicable to GXP1450). The default setting is "Yes". If set to "No", the stock information screen will not show.

Configures stock code for the phone to look up and display the stock information (Not applicable to GXP1450).

Configures to enable or disable currency update on the phone (Not applicable to GXP1450). The default setting is "Yes". If set to "No", the currency information screen will not show.

Configures currency code for the phone to look up and display the currency information (Not applicable to GXP1450).

Configures the LCD backlight brightness level (from 0 to 8) for phone's idle status and active status. The default value is 6 for active status and 2 for idle status.

Configures the LCD contrast level (from 0 to 20). The default value is 10.

FIRMWARE VERSION 1.0.4.23 GXP2120/GXP2110/GXP2100/GXP1450 USER MANUAL Page 51 of 69