Grandstream Networks GXP1450 End Conference, Join more parties in established conference call

Select 1 LINE key and press to resume the 2-way conversation;

If users would like to re-establish conference call, before 1 separate LINE is selected, press the ReConf softkey right after the conference call is held/split;

•End Conference.

Press HOLD key to split the conference call. The conference call will be ended with both calls on hold; Or

Users could press the EndCall softkey or simply hang up the call to terminate the conference call.

GXP2120/GXP2110/GXP2100/GXP1450 supports Easy Conference Mode, which can be used combined with the traditional way to establish the conference.

•Initiate a conference call.

Establish 1 call;

Press CONF key and a new line will be brought up using the same account;

Dial the number and press SEND key to establish the second call;

Press CONF key or press the ConfCall softkey to establish the conference.

•Join more parties in established conference call.

Establish conference call;

Press CONF key and a new line will be brought up using the same account;

Dial the number and press SEND key to establish the second call;

Press CONF key or press the ConfCall softkey to join the new party in the established conference.

•Split and Re-conference.

During the conference, press HOLD key. The conference call will be split and both calls will be put on hold separately with 2 LINE keys blinking in green;

Select 1 LINE key and press to resume the 2-way conversation;

If users would like to re-establish conference call, before 1 separate LINE is selected, press the ReConf softkey right after the conference call is split.

•Cancel Conference.

If users decides not to conference after establishing the second call, press EndCall softkey instead of the ConfCall softkey/CONF key;

This will end the second call and the screen will show the first call on hold.

FIRMWARE VERSION 1.0.4.23 GXP2120/GXP2110/GXP2100/GXP1450 USER MANUAL Page 28 of 69