Date Display Format
Time Display Format
Disable
Disable Missed Call Backlight
Always Ring Speaker
Headset Key Mode
Configures the date display format on the LCD. The following formats are supported:
•
•
•
•dddd, MMMM dd: Friday, October 12 (Not applicable to GXP1450)
•MMMM dd, dddd: October 12, Friday (Not applicable to GXP1450)
Configures the time display in
When it's set to "Yes", the DTMF digits entered during the call will not display. The default setting is "No".
When it's set to "Yes", the LCD backlight will not be turned on when there is a new missed call. The default setting is "No".
Configures to enable or disable the speaker to ring when headset is used on "Toggle Headset/Speaker" mode. If set to "Yes", when the phone is in Headset "Toggle Headset/Speaker" mode, both headset and speaker will ring on incoming call. The default setting is "No".
When headset is connected to the phone, users could use the HEADSET button in "Default Mode" or "Toggle Headset/Speaker".
•Default Mode:
When the phone is in idle, press HEADSET button to off hook the phone and making calls by using headset. Headset icon will display on the left side of the screen in dialing/talking status.
When there is an incoming call, press HEADSET button to pick up the call using headset.
When there is an active call using headset, press HEADSET button to hang up the call.
When Speaker/Handset is being used in dialing/talking status, press HEADSET button to switch to headset. Press it again to hang up the call. Or press speaker/Handset to switch back to the previous mode.
•Toggle Headst/Speaker:
When the phone is in idle, press HEADSET button to switch to Headset mode. The headset icon will display on the left side of the screen. In this mode, if pressing Speaker button or Line key to off hook the phone, headset will be used.
When there is an active call, press HEADSET button to toggle
FIRMWARE VERSION 1.0.4.23 | GXP2120/GXP2110/GXP2100/GXP1450 USER MANUAL | Page 52 of 69 |