Oricom 9400, 9800 manual Set Country, Wall Mounting

Page 9

GETTING STARTED 7

Set Country

After the phone is fully charged you will need to select your country. The default setting is Australia.

1. Press the [ ] or [ ] button to scroll to the SET COUNTRY sub-menu.

2.Press the [ ] button to enter the menu. SET

COUNTRY 1AUS and 2NZL shows in the display.

3.Use the keypad on the handset to select 1 or 2, or use

the [ ] or [ ] button to scroll to your selection. 1AUS is the default setting.

4.Press the [ ] button to confirm. You will hear a confirmation tone.

Wall Mounting

1.Turn the base over.

2.Attach the wall mounting pedestal by first inserting the tabs on the open edge of the pedestal into the slots on the lower portion of the back of the base. Then push down and snap the pedestal into place.

3.Slip the mounting holes (on the back of the base) over the wall plate posts, and slide the unit down into place. (Wall plate not included.)

Note:

If desired, gather the extra telephone line and power adaptor cord together and store inside the wall mounting pedestal.

Image 9
Contents Ultra Series Table of Contents Page Tip General Product CarePage Purchasing additional handsets Pack contentsYou must connect the handset battery before use Installing the Handset BatteryBase Station Wall Mounting Set CountryYour cordless handset FEATuRESYour Base unit ultra9400 Your Base unit ultra9800 Answering System Setup Setting the Voice Prompt LanguageVoice Time/Day Stamp and Real Time Clock Voice Instruction Speaker VolumeRecording the Outgoing Announcement Sample Outgoing AnnouncementStandby Screen Programming FunctionsRoom Monitor applicable only with additional handsets Handset Setup LanguageHandset Name Ringer Tone Ringer VolumeStoring VIP Melody VIP MelodyReviewing And Deleting Stored VIP Melody Record Changing a Stored VIP Melody RecordKey Tone Auto AnswerMessage Length Message Alert for answering systemSecurity Code for answering system Rings to Answer for answering systemTelephone Operation Call Timer Ringer HI/LOW/OFF Shortcut Auto StandbyAnswering Calls Exit Last Number RedialPaging form base/Group Receiver Volume ControlMute Do Not Disturb DNDIntercom Operation applicable only with additional handsets Advanced Intercom FeaturesMaking an Intercom Call Receiving an Intercom CallThree-Way Conference Calling Two-Way CallingTransferring External Calls to Other Handsets Caller ID Call waitingTake two different calls at the same time Australia only Storing CID Records In CID Memory Receiving CID RecordsReviewing CID Records Dialling a CID NumberStoring CID Records in phonebook Deleting a CID RecordDeleting All CID Records Phone book View RecordsAdd Records Edit Records Character mapDialling a Number from phone book Delete RecordsMessage Counter Answering System OperationScreening Calls from the Base Mailbox IndicatorMessage Playback Memory FullTo erase all messages in mailbox Erasing MessagesTo erase a message from the handset Leaving a MemoWhen the answering system picks up Remote accessAccessing the Answering System from Another Location Cordless HandsetMemory Full Connecting the Belt Clip Connecting an Optional Headset not included to the HandsetBelt clip and Optional Handset Button and Supplementary services Advanced SettingsRecall Time Button on PBX phone systemsDe-Registration RegistrationDefault Setting Feature Value TEChNICAL SpECIFICATIONSTroubleshooting TroubleshootingWarranty Information Australia Maintenance/GuaranteeCaller ID REN RN for New ZealandNew Zealand Customer Support Australia Customer Support