Oricom 8800 To switch handset on/off, To adjust the volume, To mute the microphone, To end a call

Page 15

TIP

If Auto Pick up mode is on, simply lift up the handset from its base to answer the call. The default setting is On. If you have changed Auto Pick up mode to Off, you will need to press [] to answer a call.

USING THE PHONE 14

To switch handset on/off

1.Press and hold [] until the handset switches off.

2.Press and hold [] again to switch the handset back on.

NOTE

An incoming call has priority over other events. Whenever there is an incoming call, other operations in progress such as phone settings, menu navigation, etc. will be ended.

To adjust the volume

1.During a call, press [ ] or [ ] to adjust the earpiece or loudspeaker volume. The level is shown in the handset display.

To mute the microphone

Mute the microphone so that you can talk to someone else in the room without your caller hearing you.

1.During a call, press []. The microphone is muted.

2.Press [] again to turn the microphone back on.

To end a call

1. Press [].

After you hang up, the duration of your call is displayed for 5 seconds.

Note

if the handset is turned off, the phone will not ring.

To call a second external number

Put an external caller on hold to make a second external call. You can then switch between both callers or hold a 3-way conference call.

1.During your call, press []. Scroll [ ] to INIT 2ND CALL.

2.Press []. Display shows CALLING R.

3.Enter the second number.

4When your second caller answers, press [] to open the option menu:

CONFERENCE - press [] to initiate a 3-way with an external caller and internal caller.

SWITCH CALLS - press [] to switch between the two callers.

5. Press [] to hang up.

NOTE

If auto hang-up is on, replace the handset on the base to end the call. The default setting is ON.

Image 15
Contents Slim Series Contents Clock & Alarm Appendix Avoid exposure of this telephone to moisture or liquid Getting StartedHandset range Signal strengthInstallation and Charger LocationBattery performance Battery low warningBase Stand Pack contentsWall mounting Plug the AC adaptor into a power pointOverview of the Handset EarpieceIntercom to make a internal call Handset display Signal Navigating the menu Overview of the baseMenu map Using the phone To end a call To switch handset on/offTo adjust the volume To mute the microphoneTo transfer an external call to another handset To switch between an internal and external callMulti-handset Operation To call another handset intercomCall waiting Australia Only Recall featureRecall function when connected to a PBX To make a three way conference callEntering names PhonebookTo view and dial phonebook entries To store an entryKey Character mapEnter a pause To view an entryTo copy the phonebook to another handset To edit an entryTo delete an entry To delete all entriesTo delete a speed dial number To store a phonebook entry as a speed dial numberCaller ID To view the calls listTo dial from the calls list To delete a calls list entry To delete entire calls listTo redial the last number To delete entire redial list To view and dial a number in the redial listTo copy a redial number to the phonebook To delete a redial list entryTo set date and time Clock & AlarmTo set alarm To set alarm melodyTo set a Group melody Personal settingsTo set the ring volume To set the ring melodyTo set auto hang up To set the Key tones on/offTo set auto pick up answer To change the handset namePlace that handset in the room To set babysit mode onTo set the backlight on/off To lock the KeypadTo set the Recall time Advanced settingsAuto prefix To Reset your PhoneTo set a number to be barred To set the PINTo set Country To turn intrusion onPress Press to return to standby To unregister a handset RegistrationRegister new handsets on the Slim base To register a handsetAnswer & Record Using the AnsweringTo set answer mode Outgoing messagesTo delete a personalised outgoing message Ring delayTo switch the answering machine on/off To record an outgoing messageTo record a memo New MessageTo play messages To delete all messagesCall screening Remote accessTo turn Remote Access on/off Switch handset call screening on/offMemory full To set TAM LanguageCustomer Support Troubleshooting Other electrical appliances Problem Possible causes Solutions Bad audio qualityService 2nd call service can be activatedBase Battery is fully chargedCannot access Switch Remote access onWarranty Warranty Information AustraliaREN RN for New Zealand Australia New Zealand