Oricom 8000, 8800 manual Location, Handset range, Signal strength, Installation and Charger

Page 6

5GETTING STARTED

Location

You need to place your Slim base within 2 metres of the mains power socket and telephone socket so that the cables will reach.

Make sure it is at least 1 metre away from other electrical appliances to avoid interference. Your unit works by sending radio signals between the handset and base. The strength of the signal depends on where you site the base. Putting it as high as possible ensures the best signal.

Handset range

The Slim has a range of 300 metres outdoors when there is a clear line of sight between the base and handset. Any obstruction between the base and handset will reduce the range. With the base indoors and handset either indoors or outdoors, the range will normally be up to 50 metres. Thick concrete walls can severely affect the range.

Signal strength

The icon on your handset indicates when you are in range. When out of range of the base, the screen shows SEARCHING the icon

flashes and the handset gives an out-of-range warning tone every minute. This tone is repeated until you move back into range.

Installation and Charger

1.Connect the mains adaptor (supplied) to the socket on the back of the base unit and to the wall mains supply.

2.Connect the telephone cord to the phone socket on the back of the base unit and into the wall phone socket.

3.Insert 2 rechargeable Ni-MH AAA batteries (included), observing the correct polarity, into the battery compartment on the handset. Slide the battery door firmly into place.

4.Place the handset on the charging cradle and charge the batteries for a full 14 hours before using it for the first time.

Select your Country

After the phone is fully charged you will need to select your country.

1.The phone will display Welcome.

2.Press [].

3.Scroll [ ] or [ ] to select Australia or New Zealand.

4.Press [].

5.Press [] again to confirm.

Image 6

Contents Slim Series Contents Clock & Alarm Appendix Getting Started Avoid exposure of this telephone to moisture or liquidLocation Signal strengthInstallation and Charger Handset rangeBattery low warning Battery performancePack contents Base StandPlug the AC adaptor into a power point Wall mountingOverview of the Handset EarpieceIntercom to make a internal call Signal Handset displayOverview of the base Navigating the menuMenu map Using the phone To mute the microphone To switch handset on/offTo adjust the volume To end a callTo call another handset intercom To switch between an internal and external callMulti-handset Operation To transfer an external call to another handsetTo make a three way conference call Recall featureRecall function when connected to a PBX Call waiting Australia OnlyTo store an entry PhonebookTo view and dial phonebook entries Entering namesTo view an entry Character mapEnter a pause KeyTo delete all entries To edit an entryTo delete an entry To copy the phonebook to another handsetTo store a phonebook entry as a speed dial number To delete a speed dial numberCaller ID To view the calls listTo dial from the calls list To delete a calls list entry To delete entire calls listTo redial the last number To delete a redial list entry To view and dial a number in the redial listTo copy a redial number to the phonebook To delete entire redial listTo set alarm melody Clock & AlarmTo set alarm To set date and timeTo set the ring melody Personal settingsTo set the ring volume To set a Group melodyTo change the handset name To set the Key tones on/offTo set auto pick up answer To set auto hang upTo lock the Keypad To set babysit mode onTo set the backlight on/off Place that handset in the roomAdvanced settings To set the Recall timeTo set the PIN To Reset your PhoneTo set a number to be barred Auto prefixTo set Country To turn intrusion onPress Press to return to standby To register a handset RegistrationRegister new handsets on the Slim base To unregister a handsetOutgoing messages Using the AnsweringTo set answer mode Answer & RecordTo record an outgoing message Ring delayTo switch the answering machine on/off To delete a personalised outgoing messageTo delete all messages New MessageTo play messages To record a memoSwitch handset call screening on/off Remote accessTo turn Remote Access on/off Call screeningTo set TAM Language Memory fullCustomer Support Troubleshooting 2nd call service can be activated Problem Possible causes Solutions Bad audio qualityService Other electrical appliancesSwitch Remote access on Battery is fully chargedCannot access BaseWarranty Information Australia WarrantyREN RN for New Zealand Australia New Zealand