Oricom 8000, 8800 manual Multi-handset Operation, To call another handset intercom

Page 16

15USING THE PHONE

Multi-handset Operation

Your Slim can have up to 5 handsets registered to the base unit. Each handset has its own number HS-1, HS-2, HS-3, HS-4 and HS-5 shown on the left-hand side of the display.

With 2 or more handsets you can:

Make intercom calls while on an external call

Switch between an external call and intercom call

Transfer an external call from one handset to another

Set a 3-way conference call between yourself, an external call and intercom call

NOTE

A maximum of 1x external call and 2x intercom calls can take place at the same time.

If you make an external call + another handset is on line = result is a busy tone.

You can make an intercom call when the other handset is in progress.

To call another handset: intercom

This feature is only available when there are at least 2 registered handsets. It allows you to make internal calls, transfer external calls from one handset to another and use the conference option.

1. Press [ ].

If you have two handsets, the other handset is called automatically.

If more than two handsets are registered to the base, their numbers are displayed, e.g. 2345*. Enter the number of the

handset you want to call or press [ ] to ring all handsets.

2. Press [] to hang up.

NOTE

If the handset does not belong to the Slim range, this function may not be available.

To transfer an external call to another handset

1.During an external call, press [ ]. Your caller is put on hold.

2.Enter the number of the handset you want to call or press [ ] to ring all handsets. If there are only two handsets, the other handset is called automatically.

3.When the other handset answers, announce the caller then press [] to transfer the call. If the other handset does not answer, press [ ] to talk to your caller again.

To switch between an internal and external call

1.During an external call, press [ ]. Your caller is put on hold.

2.Enter the number of the handset you want to call or press [ ] to ring all handsets. If there are only two handsets, the other handset is called automatically.

3.When the other handset answers you can speak privately to your internal caller.

Image 16
Contents Slim Series Contents Clock & Alarm Appendix Getting Started Avoid exposure of this telephone to moisture or liquidSignal strength Installation and ChargerLocation Handset rangeBattery low warning Battery performancePack contents Base StandPlug the AC adaptor into a power point Wall mountingEarpiece Overview of the HandsetIntercom to make a internal call Signal Handset displayOverview of the base Navigating the menuMenu map Using the phone To switch handset on/off To adjust the volumeTo mute the microphone To end a callTo switch between an internal and external call Multi-handset OperationTo call another handset intercom To transfer an external call to another handsetRecall feature Recall function when connected to a PBXTo make a three way conference call Call waiting Australia OnlyPhonebook To view and dial phonebook entriesTo store an entry Entering namesCharacter map Enter a pauseTo view an entry KeyTo edit an entry To delete an entryTo delete all entries To copy the phonebook to another handsetTo store a phonebook entry as a speed dial number To delete a speed dial numberTo view the calls list Caller IDTo dial from the calls list To delete entire calls list To delete a calls list entryTo redial the last number To view and dial a number in the redial list To copy a redial number to the phonebookTo delete a redial list entry To delete entire redial listClock & Alarm To set alarmTo set alarm melody To set date and timePersonal settings To set the ring volumeTo set the ring melody To set a Group melodyTo set the Key tones on/off To set auto pick up answerTo change the handset name To set auto hang upTo set babysit mode on To set the backlight on/offTo lock the Keypad Place that handset in the roomAdvanced settings To set the Recall timeTo Reset your Phone To set a number to be barredTo set the PIN Auto prefixTo turn intrusion on To set CountryPress Press to return to standby Registration Register new handsets on the Slim baseTo register a handset To unregister a handsetUsing the Answering To set answer modeOutgoing messages Answer & RecordRing delay To switch the answering machine on/offTo record an outgoing message To delete a personalised outgoing messageNew Message To play messagesTo delete all messages To record a memoRemote access To turn Remote Access on/offSwitch handset call screening on/off Call screeningTo set TAM Language Memory fullCustomer Support Troubleshooting Problem Possible causes Solutions Bad audio quality Service2nd call service can be activated Other electrical appliancesBattery is fully charged Cannot accessSwitch Remote access on BaseWarranty Information Australia WarrantyREN RN for New Zealand Australia New Zealand