Oricom 8800, 8000 manual Advanced settings, To set the Recall time

ADVANCED SETTINGS 28

Advanced settings					The user has the option to adjust the time to short, medium or long (100, 250, or
					600) if the unit is being used in a situation that differs from the network standard.
					The default recall time is suitable for your country and network operator. It is
This setting is useful to access certain network and PBX/					unlikely that you should need to change this setting unless advised to do so.
switchboard services.					Call barring
To set the Recall time					Prevent certain numbers from being dialled from your Slim. Store
					up to four specific numbers, each up to 4 digits, for example,
You can use the Recall button on your telephone when using your
					international or local prefixes.
network operator’s services such as call waiting etc. A subscription					NOTE
may apply for these services contact your network operator for
more information. If this function is not working correctly change
					If you switch Call barring on, BARR MODE ON will be displayed on your screen
the setting using the instruction below:
					in standby mode.
1.	Press [		], scroll [ ] or [ ] to ADVANCED SET and press		To switch call barring on/off
	[	].
2.	RECALL TIME is displayed. Press [			].	1.	Press [		], scroll [ ] or [	] to ADVANCED SET and press
						[	].
3.	Press [		] or [ ] to select the setting you want: SHORT,
					2.	Scroll [		] or [ ] to CALL BARRING. Press [		].
	MEDIUM, LONG.
4.	Press [		] to confirm.		3.	Enter the master PIN (default setting 0000) and press [					].
5.	Press [		] to return to standby.		4.	MODE is displayed. Press [			].
Note					5.	Press [		] or [ ] to select ON or OFF. Press [		] to confirm.
					6.	Press [		] to return to standby. You can now set the number

Recall 1	(Short) has been set to 100ms and Recall 2 (medium) has been set to	(See below).
250ms and Recall 3 (long) has been set to 600ms. Recall 1 = Australia (100ms),
Recall 3	= New Zealand (600ms). The default is Recall 1.