35 USING THE ANSWERING SYSTEM (Slim8800 ONLY)
3. Speak your message. Press [
] to end recording.
Remote access
Remote access allows you to operate your answering machine and listen to your messages by calling your phone from another phone.
The default setting is on.
1.Call your phone. When you hear your outgoing message, press [ # ] .
2.Enter your 4 digit PIN. The default code is 0000. You hear a confirmation beep.
NOTE
When the answer machine is switched off it will still answer after 14 rings.
To turn Remote Access on/off
1.Press [
], scroll [ 
] or [ 
] to ANSW MACHINE and press [
].
2.Scroll [ 
] or [ 
] to ANSW SETTINGS and press [
].
3.Scroll [ 
] or [ 
] to REMOTE ACC and press [
]
4.Scroll [ 
] or [ 
] to select ACTIVATED or DEACTIVATED.
5.Press [
] to confirm.
NOTE
You may change this default code for increased security, see ‘PIN’ .
3.After entering your PIN as stated above, use the keypad to operate your answering machine:
2Play messages
1Play previous message
3 Play next message
6 Delete message playing
7 Switch answer machine on
8 Stop playback
9 Switch answer machine off
Call screening
Use your handset or base speaker to hear a caller leaving a message. You can then choose to ignore the caller or pick up the call.
The default settings are:
•Handset call screening: On
To interrupt at the handset:
1. If you want to interrupt and take the call press [
] or [ 
].
Switch handset call screening on/off
1.Press [
], scroll [ 
] or [ 
] to ANSW MACHINE and
press [
].
2.Scroll [ 
] or [ 
] to ANSW SETTINGS and press [
].
3.Scroll to HS SCREENING and press [
].