USING THE ANSWERING SYSTEM (Slim8800 ONLY) 36
4. | Scroll [ | ] or [ ] to select ON or OFF. | If the memory becomes full while a caller is leaving a message, |
5. | Press [ | ] to confirm. | they will hear a beep and the call is ended. |
|
To access the answering machine menu via the Calls list
When the 
is flashing to indicate new messages you can see caller details via [ 
] or press [ 
] again to go to ANSW MACHINE to play new messages.
1.Press [ 
], CALL LIST is displayed.
2.Press [ 
], ANSW MACHINE is displayed.
3.Press [
], PLAY is displayed.
4.Press [
], the handset will start the new message playback. Once all messages are played, the handset will return to standby.
NOTE
During message playback, press [
] anytime to return to standby.
To set TAM Language
1.Press [
], scroll [ 
] or [ 
] to ANSW MACHINE and
press [
].
2.Scroll [ 
] or [ 
] to ANSW SETTINGS and press [
].
3.Scroll [ 
] or [ 
] to TAM LANGUAGE and press [
].
Memory full
The memory is full if there is less than 15 seconds of recording time left or if the maximum total of 59 messages has been reached.
When the memory becomes full:
•The LED will flash quickly.
•The 
flashes quickly on the handset display.
•The machine will automatically switch to Answer Only mode.