USING THE PHONE 16
4.Press [ 
]to switch between both callers.
5.Press [
] to hang up.
To make a three way conference call
1.During an external call, press [ 
]. Your caller is put on hold.
2.Enter the number of the handset you want to call or press [ 
] to ring all handsets. If there are only two handsets, the other handset is called automatically.
3.When the other handset answers, announce the call then press and hold [ 
] to connect both calls. If the other handset does not answer, press [ 
] to talk to your caller again.
4.Press [
] to hang up.
Recall feature
Recall feature can be used when you are using some services provided by your network operators such as “call waiting”, etc. A subscription may apply for these services, contact your network operator for more information.
While you are talking on the phone, press [ 
] key on the cordless handset to send a Recall.
Call waiting (Australia Only)
You can use the recall function to answer a second call while you are on the phone. However this service needs to be turned on. For example, to turn on Telstra’s Call Waiting service:
1.Press [ 
] on the cordless handset to wait for dial tone then
press[ 
] [ 
] [ 
] [ # ].
2.You will hear a service tone then press [ 
] again.
Take two different calls at the same time
During a call, you will hear two loud beeps periodically to notify you of another incoming call. If you wish to answer this call,
1.Press [ 
] key. You will hear a dial tone.
2.Press [ 
] to put the current call on hold and talk with the second caller.
3.Repeat steps
Recall function when connected to a PBX
If you have connected this telephone to an office PBX, you can use all the facilities such as call transfer, automatic recall, etc. The
[
] key provides access to these facilities. If you need to change the Recall setting for use on an office PBX system follow the instructions on page 30.