Oricom 8000, 8800 manual To set babysit mode on, To set the backlight on/off, To lock the Keypad

Page 28

27PERSONAL SETTINGS

To set babysit mode on

Leave one handset in a room and use another handset to hear sounds in that room.

1. Press [], scroll [ ] or [ ] to PERSONAL SET and press

[].

2.Scroll [ ] or [ ] to BABYSIT MODE. Press [].

3.Press [ ] or [ ] to select ON or OFF.

4.Press [] to confirm.

When switched On, you can leave this handset in the room you wish to monitor. Only the microphone is on. Anyone in the room cannot hear you.

5.Place that handset in the room.

6.At a second handset, press [ ] and enter the number of the handset you are using as a room monitor. You can now hear sounds coming from the room.

To stop room monitoring at any time, press [].

To set the backlight on/off

1.Press [], scroll [ ] or [ ] to PERSONAL SET and press

[].

2.Scroll [ ] or [ ] to BACKLIGHT. Press [].

3.Press [ ] or [ ] to select ON or OFF.

4.Press [] to confirm.

To lock the Keypad

Prevent accidental dialling while carrying the handset by locking the keypad.

1.Press and hold [ ]. The display shows KEYS LOCKED.

2.To unlock the handset, press and hold [ ] again.

NOTE

While the keypad is locked, you can answer incoming calls as normal.

Image 28
Contents Slim Series Contents Clock & Alarm Appendix Getting Started Avoid exposure of this telephone to moisture or liquidSignal strength Installation and ChargerLocation Handset rangeBattery low warning Battery performancePack contents Base StandPlug the AC adaptor into a power point Wall mountingEarpiece Overview of the HandsetIntercom to make a internal call Signal Handset displayOverview of the base Navigating the menuMenu map Using the phone To switch handset on/off To adjust the volumeTo mute the microphone To end a callTo switch between an internal and external call Multi-handset OperationTo call another handset intercom To transfer an external call to another handsetRecall feature Recall function when connected to a PBXTo make a three way conference call Call waiting Australia OnlyPhonebook To view and dial phonebook entriesTo store an entry Entering namesCharacter map Enter a pauseTo view an entry KeyTo edit an entry To delete an entryTo delete all entries To copy the phonebook to another handsetTo store a phonebook entry as a speed dial number To delete a speed dial numberTo view the calls list Caller IDTo dial from the calls list To delete entire calls list To delete a calls list entryTo redial the last number To view and dial a number in the redial list To copy a redial number to the phonebookTo delete a redial list entry To delete entire redial list Clock & Alarm To set alarm To set alarm melody To set date and timePersonal settings To set the ring volumeTo set the ring melody To set a Group melodyTo set the Key tones on/off To set auto pick up answerTo change the handset name To set auto hang upTo set babysit mode on To set the backlight on/offTo lock the Keypad Place that handset in the roomAdvanced settings To set the Recall timeTo Reset your Phone To set a number to be barredTo set the PIN Auto prefixTo turn intrusion on To set CountryPress Press to return to standby Registration Register new handsets on the Slim baseTo register a handset To unregister a handsetUsing the Answering To set answer modeOutgoing messages Answer & RecordRing delay To switch the answering machine on/offTo record an outgoing message To delete a personalised outgoing messageNew Message To play messagesTo delete all messages To record a memoRemote access To turn Remote Access on/offSwitch handset call screening on/off Call screeningTo set TAM Language Memory fullCustomer Support Troubleshooting Problem Possible causes Solutions Bad audio quality Service2nd call service can be activated Other electrical appliancesBattery is fully charged Cannot accessSwitch Remote access on BaseWarranty Information Australia WarrantyREN RN for New Zealand Australia New Zealand