RCA 29893 manual Setting the Security Code, Enter button

SETTING THE SECURITY CODE

This feature allows you to change the factory default	ENTER button
remote access code used for remote access to you	MENU button	PLAY/STOP
answerer. The default code is 123.
		button

1.If you just adjusted the Rings to Answer menu, skip to step 2. If you haven’t adjusted any other setting, press and release the MENU button until REMOTE ACCESS is displayed.

2.Use NEXT or PREVIOUS to select the first digit.

3.Once the first digit is set, press ENTER.

4.Repeat steps 2-3 until all the digits of the security code are set.

N

E

					W
					C
					ALL
MENU					MEMO
	ENT			TING
	ER	MESSAGE		GREE
ERASE	DIAL				VOL +
		ST OP
					ON/OFF
MEM DIAL STORE		MESSAG ES/CALLER ID		VOL -
					FLASH
A	1	ABC 2		DEF 3
QUICK DIAL
					REDIAL/PAUSE
B	GHI 4	JKL 5		MNO6
	RS 7		8	YZ 9	HOLD
C	PQ	TUV		WX
MEM DIAL	*			#
		OPER 0			SPEAKER
	TONE

5. When finished, press ENTER to confirm.The unit beeps.	mic
NOTE: To skip to the next setting, press MENU. To
exit setup, press PLAY/STOP.	PREVIOUS button NEXT button

TIP: You can use the keypad to enter all the digits in one step. To enter 456, press 4,5, and 6. Then press ENTER.

16